1 / 1
HevORT X-Carriage for Dragon Burner (MGN12H) — image 1

HevORT X-Carriage for Dragon Burner (MGN12H)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Stable, universal HevORT X-carriage for the Dragon Burner. MGN12H, rear BTT Eddy USB adapter, optical X-endstop cutout.

Rating
0 / 5
Likes
2
Downloads
7
Makes
0
Views
113
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

HevORT X-Carriage for the Dragon Burner

For my HevORT (CoreXY) there was no X-carriage that cleanly fits the

Dragon Burner, so I designed my own from scratch in FreeCAD.

The existing carriages are optimized for low mass and speed — this one

is built for stability and a universal mounting setup instead.

Features

  • - Direct mount for the Dragon Burner toolhead

  • - Integrated BTT Eddy USB adapter plate on the rear

  • - Cutout on top for a standard optical X-endstop

  • - Designed for MGN12H linear rails (HevORT CoreXY)

Print settings

  • - Material: PETG (ABS/ASA works too in an enclosure)

  • - Nozzle: 0.4 mm

  • - Perimeters: 4

  • - Infill: 40–50 %

  • - Supports: not required (print in the orientation shown)

  • ### Notes

The optical endstop and BTT Eddy wiring/Klipper config depend on your

mainboard — check the full build write-up (design rationale, material

trade-offs and lessons learned) on 
DE: https://devmaker.net/3d-druck/dragon-burner-x-carriage-hevort-freecad/
EN: https://devmaker.net/en/3d-printing/dragon-burner-x-carriage-hevort-freecad/

Designed & printed by Harald · devmaker.net

Tags