HevORT X-Carriage for Dragon Burner (MGN12H)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stable, universal HevORT X-carriage for the Dragon Burner. MGN12H, rear BTT Eddy USB adapter, optical X-endstop cutout.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 110
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
HevORT X-Carriage for the Dragon Burner
For my HevORT (CoreXY) there was no X-carriage that cleanly fits the
Dragon Burner, so I designed my own from scratch in FreeCAD.
The existing carriages are optimized for low mass and speed — this one
is built for stability and a universal mounting setup instead.
Features
- Direct mount for the Dragon Burner toolhead
- Integrated BTT Eddy USB adapter plate on the rear
- Cutout on top for a standard optical X-endstop
- Designed for MGN12H linear rails (HevORT CoreXY)
Print settings
- Material: PETG (ABS/ASA works too in an enclosure)
- Nozzle: 0.4 mm
- Perimeters: 4
- Infill: 40–50 %
- Supports: not required (print in the orientation shown)
### Notes
The optical endstop and BTT Eddy wiring/Klipper config depend on your
mainboard — check the full build write-up (design rationale, material
trade-offs and lessons learned) on
DE: https://devmaker.net/3d-druck/dragon-burner-x-carriage-hevort-freecad/
EN: https://devmaker.net/en/3d-printing/dragon-burner-x-carriage-hevort-freecad/
Designed & printed by Harald · devmaker.net