1 / 11
Titan Aero mount for hevort
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Because the Titan aero is very similar to the hemera, I modified MirageC's official Hemera mount to be used with the…
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 17
- Makes
- 0
- Views
- 418
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
Because the Titan aero is very similar to the hemera, I modified MirageC's official Hemera mount to be used with the titan aero.
Assembly : https://www.tinkercad.com/things/eVw59P6MlFR
Change
- Use m3 heat thread insert instead of hex nuts.
- Added some slot for ziptie
- Added some solid 0.2mm layer under overhang bolt/nut holes for easier printing. You will need to break this hole manually after printing. (check the green marks on the review image)
Some mirror tweak on the belt path and block mount.
Better idler : https://www.thingiverse.com/thing:4613486
The body require support to be printed. I enabled "support anywhere" on cura and place support blocker on not-needed places.
Category: 3D Printer Extruders