Counting matching models…
NEW VERSION - CR-10(S) NG v1.2 has been released! THIS IS CURRENTLY INCOMPLETE, CHECK THE CHANGELOG BELOW CR-10 NG beta - coreXY conversion This printer is based off of the Ender 3 NG beta v1.1. Supports CR-10 and CR-10S. PRINTER OVERVIEW…
The toolhead mount now has the hole profile for a stealthburner and i also added holes for threaded inserts on the top so I can mount an adxl345 accelerometer
https://github.com/92sho16/RigidCORE This is a minor remix of Jordan's work (https://www.printables.com/model/983693-corexy-conversion-for-rigidbot-3d-printer-core-xy). I wanted to use a more commonly used x carriage so I remixed the y…
OUTDATED VERSION This version is no longer maintained. Please use the current Duender Project: Printables: https://www.printables.com/model/1798903-duender-project-ender-3-to-corexy-conversion https://irbis3d.xyz/ GitHub:…
Introduction This is a conversion from H-bot to coreXY for the ExtruH plotter which I designed a while back Is it better? No , although it is different Does it look cooler? Arguably , your mileage may vary Should you print it? Probably…
A simple BLtouch mount for the ender 5 Corexy mod with a e3d v6 revo hotend
OUTDATED VERSION This version is no longer maintained. Please use the current Duender Project: Printables: https://www.printables.com/model/1798903-duender-project-ender-3-to-corexy-conversion https://irbis3d.xyz/ GitHub:…
All Lathe DIY Machine https://3d4diy.com/category/diy-lathe 3D Printer Machine DIY: https://3d4diy.com/category/diy-3d-printer All mini CNC Machine Homemade https://3d4diy.com/category/mini-cnc All Milling CNC Machine Homemade…
Project in progress... Based on 3d printer Dynasty CoreXY и Ender 7 I put it out in public for constructive criticism. The printer will cost quite a lot, up to about $1,500. So far, just a sketch of my printer and frame, a lot may change…
Note I recommend using second hand/recycled parts from old printers. It makes absolutely no sense to source all the parts new. Tip Use the Voron Trident assembly guide to build the bed arms and the A/B motor mounts. Please note that the…
Simple and low cost upgrade of Prusa MINI to coreXY motion system. It uses much more of the original MINI than other “upgrades”. It keeps the original extruder, hotend, board, display, steel rods, bearings, bolts, and ALU extrusions.…
CoreXY Conversion for RigidBot 3D Printer If you still have a RigidBot 3D Printer (first of all… WHY??) here is a great way to modernize it a bit by converting it to CoreXY. Many of Luke's parts have been converted to use M3 heat inserts…
First off: Shout out to the creators of the Ender 3 NG. Thank you for creating this conversion and providing the BOM and printed parts. Info on E3NG project: https://rh3d.xyz/ What is this: The goal of this rework was to simplify the…
IMPORTANT: Measurement must be taken from the centers of each pulley and the Carbon Drive application must be used in motor mode. IMPORTANTE: la mejor dension en ambas poleas de de 110-114Hz…
Recommended extruder: https://www.printables.com/model/282297-lgx-lite-extruder-fdm-case BOM list: https://docs.google.com/spreadsheets/d/1jIvkFzaaigdMwBqxpe_ywWBCPb8TMADJeScp-gi-FZU/edit?usp=sharing
Dual extruder/dual hotend mod. I've been working on it on and off for a few years and decided to share it once I understood that there is nothing else I can add :). I have managed to print hundreds of models meaning thousands of hotend…
I bought used Ender 5 pro just to mod it to coreXY, but after seek some avaiable design I still want to mod as my like: Using 5mm bore idler as stronger and found cheaper than 3mm one in my country Using my odd 9,6mm carbon rods on X and…
Designed and built (electronics pending) a custom 30cm per axis build volume corexy printer from scratch
Assembly requires 4 Insert_M3 nuts and 4 pieces of stone into the profile, screws M3 - 6 mm 8 mm Printing ABS | ABS GF4 | ABS CF15 Rubber Feet - Tpu
Update 2024-12-30 Added the Front CoreXY parts with heat set inserts corexy-front-left-r5_mod corexy-front-right-r5_mod Update 2024-12-13 Updated the top parts left and right sides: added a missing screw hole (for heatset insert)…
NEW VERSION - CR-10(S) NG v1.2 has been released! THIS IS CURRENTLY INCOMPLETE, CHECK THE CHANGELOG BELOW CR-10 NG beta - coreXY conversion This printer is based off of the Ender 3 NG beta v1.1. Supports CR-10 and CR-10S. PRINTER OVERVIEW…
Screen Protector (non-compatible with SE/KE versions)
The toolhead mount now has the hole profile for a stealthburner and i also added holes for threaded inserts on the top so I can mount an adxl345 accelerometer
A few things first: This mod will very likely improve your print quality but it also will most definitely void your printers warranty. This is still a work in progress. Stuff might change depending on the input i get sorry for the wall of…
https://github.com/92sho16/RigidCORE This is a minor remix of Jordan's work (https://www.printables.com/model/983693-corexy-conversion-for-rigidbot-3d-printer-core-xy). I wanted to use a more commonly used x carriage so I remixed the y…
Hello XL makers! This i a Remix of a few Remixes :D Thanks to all of them <3 Lukáš Kupec , sshyshak , Racemade3D , racerethan , Prusa Research This remix was made for pulleys from LDO or Gates that have a thickness of 10mm. The original…
This is still in development, but some people asked about it. Updates will follow as I work towards a final version. This is a refined and optimized version of my previous Ender 5 ModMax design . I was looking to improve three aspects of…
The Flourine 3D printer is designed with cost-effectiveness in mind, aiming to make 3D printing accessible to more people. It is essentially a Voron 0 fitted with smooth rods and bearings. Other than the AB motor mount, mostly all printed…
Simple printed piece that bolts down to the stock RatRig spool mount for the V-Core 4. The piece has printed threads for an M10x1.0 thread, which is the typical thread for the PTFE pneumatic fittings like pictured. This helps hold the…
OUTDATED VERSION This version is no longer maintained. Please use the current Duender Project: Printables: https://www.printables.com/model/1798903-duender-project-ender-3-to-corexy-conversion https://irbis3d.xyz/ GitHub:…
Introduction This is a conversion from H-bot to coreXY for the ExtruH plotter which I designed a while back Is it better? No , although it is different Does it look cooler? Arguably , your mileage may vary Should you print it? Probably…
I’ve been assembling this 300x300 core XY 3D printer based on the Ben Levi BLV model. Only shortcoming are the stop limit switch mounting brackets. Had to design this as the provided model was way too small to span my slightly enlarged…
The CR-30 Infinite Z (or 3DPrintMill) is at its core a CoreXY machine. This model was remixed to be able to determine if there is any skew between your A/B belts by aligning the head of the print with the X/Y on the CR-30.
These can usually be CNC milled for around $100-$150 from JLCCNC or PCBWay for a full set (CoreXY motors + AWD Motors, so CoreXY alone is even cheaper). These feature holes designed to be tapped so that shoulder bolts can be used for the…
An integrated SRA toolhead mount for V6 and V6 Volcano hotends. Use bowden_v6_mount for a regular e3D V6 hotend. To attach the hotend use the mount cover:…
Hybrid Overhaul for the Vz-330. You will need the SnakeOilXY extended CoreXY module to make this work with Klipper. MUST print in ABS-GF or better plastic!!!! Filled filament is a MUST on this build.
This model is untested because I'm waiting on something to finish my build. It should work for most of the BIQU H2 family of products and the fanduct can be used for any project (check dimensions). The fan duct is more compact than most…
These parts are untested because I'm waiting on something to finish my build but I have cut them. Made DXF files for laser cutting the acrylic parts for the Ender 3 V2 CoreXY mod. They are a little modified to make them better to cut and…
Dieser 3D-Drucker ist das Ergebnis eines Ingenieurprojekts und befindet sich noch in der Entwicklung. Ziel ist es, ein leistungsfähiges und anpassbares System zu schaffen, das sowohl hohe Druckgeschwindigkeiten als auch innovative…
The original front idler towers were too flexy for my build, so i designed a bracket to further stiffen them. Print one for the left side and mirror it for the right side. Use general Voron/zeroG settings for the print. Additionally…
INTRODUCTION (V1.1): After over a year of development, I would like to present the CanticoreXY . As the name suggests, the printer is a cantilevered CoreXY-variant. As most of you might expect, this cantilever design enjoys very few of…
https://www.printables.com/model/1174545-duender-2x-creality-ender-3-corexy-convertion Most of the build is the same as the original Duender. Use the Duender STEP file alongside this one to figure out the build. The BOM from there should…
Hello XL makers! This i a Remix of a few Remixes :D Thanks to all of them <3 Lukáš Kupec , sshyshak , Racemade3D , Prusa Research I offer another special option here. I changed the parts slightly regarding the hole for the pulley axles. I…
A simple BLtouch mount for the ender 5 Corexy mod with a e3d v6 revo hotend
OUTDATED VERSION This version is no longer maintained. Please use the current Duender Project: Printables: https://www.printables.com/model/1798903-duender-project-ender-3-to-corexy-conversion https://irbis3d.xyz/ GitHub:…
Update 10-02-2022: Andi3D made also the Cartesian version that can be used on the Minion. https://www.prusaprinters.org/prints/131960-eva-backplate-cartesian-for-pabst-ebm-fan Update 07-02-2022: Modified the inserts a bit as these where…
Simple expansion of the Prusa MINI coreXY up to 330x330 mm bed size. Physical size of the bed can be slightly bigger. Printer can be even bigger but then you need to prolong the cables coming from the hotend to the main board. Sizes Print…
This Thing contains the configuration files for Simplify 3D users who want to use it with their HyperCube or CoreXY printers. I was forced to have at least one STL file so I found a little frog like the one S3D uses for their website.…
I decided to add LED lighting to my completed HyperCube but I wanted it to be neat and non-intrusive. The LED Strip aluminum extrusion I chose included the diffuser, end caps, and mounting brackets. The end caps could have been used but…
A simple remake of Mercury one Frontplate. The fine grill replaced with a broader cross. I made it because i had problems with printing the very fine mesh on my glass bed.
Pictures are version one in which the belt geometry is off (you can see the belt pulled in). attached files run the slider full height, and the face of it 5mm closer to the rod (should have the belt straight/much closer to straight).…
CorEssentials is an open source corexy 3D printer. Built Volume: 240 mm x 250 x mm x 250 mm Hotend: E3D V6 0.4mm (Bowden & direct available) Extruder: Bondtech BMG Built Plate: Magnetic Spring Steel with PEI or Pertinax Heated Bed: 230V,…
UPDATE 07/01/2022 Refer to the Electronix Case for acrylic panels, associated mounts and BOM. https://www.thingiverse.com/thing:5110697 UPDATE 07/01/2022 The small printable panels to fit each end of the rear frame replace the acrylic. I…
You need mosty M3 bolts like any voron does, a few M3 nuts and a few extrusion nuts and M3 heatinserts. For the CoreXY part you need MGN12 rail (I used 350mm on Y and 300mm on X), A about 1m long GT2 belt and 24 F623RS bearings. THIS DOES…
I've been working on this for about 8 months. Finally got around to printing all the parts and putting it all together. Lots of tweaking and reprinting. Now I have it almost the best I can do. Still have a few things I would like to…
Want to know more about the design and assembly process? https://www.youtube.com/playlist?list=PLWL37f39O8e8jSmrYGKiWX6iMkNlrfwSp Join the Facebook Group for discussion + Q&A + Future updates and upgrades…
A simple carriage to work with the CoreXY Frame so I can use my existing HyperCube hot end mounts. Category: 3D Printer Parts
My take on a CoreXY laser engraver. This is still in progress. I haven't got endstops figured out yet but I've got it working for now. Note that the LM8UU bearings are pretty much press-fit as I printed them. I used a clamp to press them…
Prusa XL modified CoreXY (+2mm Y) for Belt spacement
I wanted to lesson the gap between the front doors of the EnXLosure and the CoreXY front upper brackets. I found a remix from INVESTEGATE which contained this change but had hexagonal patterns. I didn't like this pattern so I removed them…
I've not been very happy with the linear rods on my HyperCube so I've started trying to make it a bit more like my D-Bot. Let me know if you have any thoughts / advice. Category: 3D Printers
Firstly, feel free to advise or comment, this is my first XY build and first corexy. I bought a small plasma cutter (<8mm cut) last year and have found it quite useful, made myself stencils to cut things like stepper motor mounts etc but…
used m3 heat inserts for bracket mounting. use your best judgement on m3 hardware.
I’m not a designer, just had this idea and it worked. its Stealth Changer for Trident or similer CoreXY. I’m still working on it and trying things out. It hasn’t been tested enough yet, and it can definitely be improved, but I’ve reached…
A simple CoreXY printer using some Artillery Sidewinder X2 parts with the direct extruder motor placed between the linear rods. It uses 2020 and 2040 aluminum extrusions for the frame, and 8mm linear rods for all axis. The build volume is…
Hello E3V2 CoreXY fellow, I’m excited to introduce the Ender3 Eternity , the third generation of the Ender 3 V2 CoreXY conversion kit. This latest evolution builds on the strengths of its predecessors while embracing modern demands for…
I liked the big libary of tools, cooling options and accessory of the Ender 3NG build and remixed the toolhead base to fit all of them on my SRAsolutions Ender 3 V2 CoreXY (2nd Gen) build The bottom screws that are holding both plates…
I created this as a test and proof that certain features are working correctly. There are a million of these tests out there, however I wanted to include a 45 degree wall to test if VFA was present with just one XY motor turning.
X carriage for the CoreXY Frame Category: 3D Printer Parts
Used for checking alignment on both sides of X gantry made for the VzBot CoreXY 3D Printer Tension belts on both sides until linear rail lines up with aligner
NOT TESTED. all based on CAD measurements. hello makers! using my adapter plate from another project, I adapted it to use on the SRA corexy! you can now have a bit more flexibility and choices for hotends & extruders thanks to the small…
The Ender 3 NG v1.2 toolhead currently does not support the Biqu H2 V2S Revo hotend. I created this using Orca Slicer to install one. I am sharing it because I haven't found anyone else with a solution for this Ender 3 mod. I created it…
I created these to fix an issue that i had due to poor handling by the courier . Parts Needed. 4x 3d printed z wheel carriage 4x http://openbuildspartstore.com/delrin-mini-v-wheel-kit/ 8x…
I seen a couple versions of this type of pulley brace (like the idea) but i wanted mine to lock in place using the original equipment and is wider than all others for stability . this version holds the m4 nut for you and has a bearing…
All Lathe DIY Machine https://3d4diy.com/category/diy-lathe 3D Printer Machine DIY: https://3d4diy.com/category/diy-3d-printer All mini CNC Machine Homemade https://3d4diy.com/category/mini-cnc All Milling CNC Machine Homemade…
All Lathe DIY Machine https://3d4diy.com/category/diy-lathe 3D Printer Machine DIY: https://3d4diy.com/category/diy-3d-printer All mini CNC Machine Homemade https://3d4diy.com/category/mini-cnc All Milling CNC Machine Homemade…
All Lathe DIY Machine https://3d4diy.com/category/diy-lathe 3D Printer Machine DIY: https://3d4diy.com/category/diy-3d-printer All mini CNC Machine Homemade https://3d4diy.com/category/mini-cnc All Milling CNC Machine Homemade…
All Lathe DIY Machine https://3d4diy.com/category/diy-lathe 3D Printer Machine DIY: https://3d4diy.com/category/diy-3d-printer All mini CNC Machine Homemade https://3d4diy.com/category/mini-cnc All Milling CNC Machine Homemade…
🔄 UPDATE [Feb 18 2026]:-The Equalizer V2.0 Belt tension measurement tool for Voron 2.4. Designed for SPI digital indicators (or compatible). What it does: Compares Belt A vs Belt B deflection to match tension Profiles tension along entire…
All Lathe DIY Machine https://3d4diy.com/category/diy-lathe 3D Printer Machine DIY: https://3d4diy.com/category/diy-3d-printer All mini CNC Machine Homemade https://3d4diy.com/category/mini-cnc All Milling CNC Machine Homemade…
The TronXY X5SA series printers come with basic acrylic motor mounts and poorly aligned CoreXY cables leading to the Y carriages. In CoreXY it is important that the cables leading to the Y carriages are parallel to the Y axis, otherwise…
I've never looked at a CoreXY design so I found this interesting. I used the STL files provided and fit without any issues. Use Thomas's original STL files for the base build. Here is a few notes regarding the build: I only needed end…
E3NG-Based CoreXY Laser Engraver This project is a DIY CoreXY laser engraver based on the E3NG XY gantry . All gantry parts were printed directly from the original E3NG files (link included below). This upload focuses on the…
Project in progress... Based on 3d printer Dynasty CoreXY и Ender 7 I put it out in public for constructive criticism. The printer will cost quite a lot, up to about $1,500. So far, just a sketch of my printer and frame, a lot may change…
Project in progress... Based on 3d printer Dynasty CoreXY и Ender 7 I put it out in public for constructive criticism. The printer will cost quite a lot, up to about $1,500. So far, just a sketch of my printer and frame, a lot may change…
This mod will allow your Ender 5 printer to pint at over 300mm/s and even outperform your hot end, without loosing print quality. Recommended software is Klipper I use sensor-less homing with TMC 2209 drivers and SKR1.3 board connected to…
Note I recommend using second hand/recycled parts from old printers. It makes absolutely no sense to source all the parts new. Tip Use the Voron Trident assembly guide to build the bed arms and the A/B motor mounts. Please note that the…
With this model you can use the Prusa mini hot-end models already on Printables. I made it fit the belts for the CoreXY Design by @SE Edit: i added the carriage without fan duct so you can use a front fan duct on the Mini CoreXY, and…
With this model you can use the Prusa mini hot-end models already on Printables. I made it fit the belts for the CoreXY Design by @SE (his design is in the remix location) Edit: added a new belt holder so the belts are more in line with…
!!!!!!Important!!!!!!! Before you print the motor brackets print the TEST_RH_LH first! make sure it fits well into the aluminum extrusion! I've printed mine with PETG filament at 0.9 extrusion. If you chose to use XY RH+LH Bottom+Top with…
Update: FuseBox2R v1.1 files are available on Github. Reworked gantry is more rigid and has an improved belt path. A partially complete build guide has also been added. FuseBox2/FuseBox2R Github repo (Check here for latest part files,…
CR10NG / CR-10 NG version 1.2 REFER FIRST TO E3NG / Ender 3 NG Check the Differences of the remix compared to the original section in this remix. Files hosted here will be always up to date, changelog can be found below. Printables is the…
HiBy Digital M300 case. Open spacing for ports and buttons. No sample available to test dimensions. Print test using TPU in enclosed CoreXY printer indicated overhang issues when printed back on plate without supports, not yet addressed…
I had a tough time finding any proper integration for the Micro Swiss NG adaption to the CoreXY so I went on and made my own, this version allows for full X usage and allows you to use all the EVE3 Mods on their website. my main reason…
So, this is my 3-rd printer. It's designed to print small objects, up to 160x160x160mm. External dimensions are 315x315x320mm. As usual, it made of aluminum profiles 10x10x1mm, hardened rod 8mm and many bolts&nuts M3. As hotend is used…
CREALITY ENDER 5 PLUS - COREXY CONVERSION (8MM RODS & 10MM BELTS) This project is a complete engineering overhaul for the Creality Ender 5 Plus, transforming its kinematics from the stock Cartesian system into a high-performance CoreXY…
For the latest STLs and CAD files, please check the Github repo: https://github.com/alexyu132/encore/ Encore This is my latest CoreXY design. It's a small printer with a 120x120x120mm build area. The total size is slightly smaller than a…
This is a blend of Pinky's Papst EBM backplate (heat insert variant) with the 4028 gaping maw fan duct by Idrake88 ( https://www.thingiverse.com/thing:5330852 ) along with some adaptions. This allows you to use the Papst EBM fan with…
![[not recommended/on hold] [Enclosed CoreXY Tested] HiBy M300 Case](https://media.printables.com/media/prints/8df6d866-b456-401e-8c4c-e2c05eef34c3/images/12840400_4ef60436-3991-45d6-b674-f928dfa12afe_11660571-3864-425e-8ede-9c68e2282ae9/thumbnail.png)
