Sapphire Pro CoreXY-Misalignment Fix #2 Reinforced

I made a reinforced version of ZzoyozZ's "Sapphire Pro CoreXY-Misalignment Fix #2" from November 17, 2019. I had another version of this fix on my printer but it cracked because of bend forces created by the screw.

So I remodeled it completely in FreeCAD (file is included here) and added a rod to reinforce this part.

I would be happy to see some of your makes posted :)

Additional Parts:

I added 2 washers. On the bottom and one between the gears so the spin better. Some lube does help to.

Assembly:

• It is a little bit fiddly to assemble but doable.
• Maybe you need to widen the holes with a file or a drill.
• The screw can be reached diagonally with an allen key.
• To get the nut in use some pliers or a spanner (I suggest a spanner).
• Tip: Add some tape to the spanner so the nut does not fall out.

Source file in the Alibre Atom format is available but the website does not allow the upload. If you need it send me a message.

Appropriate credit under the “Creative Commons - Attribution” license:

This is a remix from: https://www.thingiverse.com/thing:3982521

Original creator is: Werner Heiz - ZzoyozZ 

https://www.thingiverse.com/zzoyozz/designs

Print Settings

Printer:

Two Trees Sapphire Pro

Rafts: 

No

Supports:

Yes

Resolution: 

0.30

Infill:

30%

Filament:

Redline Filament R-PLA

Red

Category: 3D Printer Parts