1 / 3
RatRig V-Core 4 Spool Mount PTFE Guides (Corexy/Hybrid & IDEX)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
PTFE guides for the stock RatRig V-Core 4 spool mounts. Keeps the PTFE from getting sucked up into the spool.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 73
- Makes
- 0
- Views
- 436
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
Simple printed piece that bolts down to the stock RatRig spool mount for the V-Core 4. The piece has printed threads for an M10x1.0 thread, which is the typical thread for the PTFE pneumatic fittings like pictured. This helps hold the PTFE tube in place and avoids it getting stuck in the spool (or wandering all over while trying to push filament through it).
You may need a longer M6 bolt to reach the T nut under the bottom plate. I used an M6x20.