Tentacool part cooling incl. Beacon mount for Goliath Long WC on vzBotxHevORT alu printhead
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A remix of the Tentacool by MirageC and sillysam71 for HevORT and VzBot printers using the Goliath Long Water Cooled
- Rating
- 0 / 5
- Likes
- 28
- Downloads
- 177
- Makes
- 1
- Views
- 2,135
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
The HD12MGN9 Tentacool Beacon duct by MirageC and sillysam71 has been adapted to decrease the y-offset. It has also been lowered slightly to fit my setup, please refer to the pictures. A suggested print orientation and support layout for FDM is included in the pictures as well.
Print settings (as pictured)
Material: XPETG (Extrudr)
Nozzle Temp 240 °C
Bed Temp 70 °C
Layer height 0.1 mm
Nozzle diameter 0.6 mm
Walls: 7
No Infill
The pictures show the Tentacool fitted to a printed print head, in the meantime this same duct has been succesfully installed onto a aluminium vzBot-HevORT print head, it can thus be considered as tested on both. Please check the pictures for my particular situation to ensure fitment.