Tentacool part cooling incl. Beacon mount for Goliath Long WC on vzBotxHevORT alu printhead
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A remix of the Tentacool by MirageC and sillysam71 for HevORT and VzBot printers using the Goliath Long Water Cooled
- Ocena
- 0 / 5
- Polubienia
- 28
- Pobrania
- 177
- Wydruki
- 1
- Wyświetlenia
- 2135
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
The HD12MGN9 Tentacool Beacon duct by MirageC and sillysam71 has been adapted to decrease the y-offset. It has also been lowered slightly to fit my setup, please refer to the pictures. A suggested print orientation and support layout for FDM is included in the pictures as well.
Print settings (as pictured)
Material: XPETG (Extrudr)
Nozzle Temp 240 °C
Bed Temp 70 °C
Layer height 0.1 mm
Nozzle diameter 0.6 mm
Walls: 7
No Infill
The pictures show the Tentacool fitted to a printed print head, in the meantime this same duct has been succesfully installed onto a aluminium vzBot-HevORT print head, it can thus be considered as tested on both. Please check the pictures for my particular situation to ensure fitment.