P
Printables
Nighthawk 36 Side mount adapters for Orbitor and Hextrudort for VZBOT printers or VORON printers running VZBOT style gantry.
Side mount adapters for Orbitor and Hextrudort for VZBOT printers or VORON printers running VZBOT style gantry.
Wyniki wyszukiwania: hextrudort
Liczymy pasujące modele…
P
Printables
Hextrudort Plus Post Sensor
A sensor between Hextrudort Plus and filament meltzone for multiplexer operations. Uses a limit switch (without the metal tab) and a 5.5mm ball bearing. No screws are required for assembly as there is a holder for the switch that keeps it…
P
Printables
FLSUN SR Rapido + VzHextrudORT custom printhead
This is a mod for the FLSUN SR to mount the Phaetus Rapido HF Hotend on the Effector and use the parts of the original extruder to replace this thing with an Vz HextrudORT to create a good Direct Drive System for this machine. For this…
P
Printables
VZ Hextrudort low ECAS mount Bowden adapter
Adapter for ECAS04 to Vz-Hextrudort-Low extruder. Useful if you use a filament encoder and to avoid false positive after a long retraction.
P
Printables
Archetype Hextrudort with CNC Carriage (WIP)
I really liked the Archetype, but didnt want to get rid of my CNC Carriage, so I hacked together a version to use Mjolnir alongside the VZ-HextrudORT and Goliath hotend together with it. It does work well on my V2.4, but I highly…
P
Printables
Hextrudort-Low Plus EBB36 Mount
The Hextrudort-Low Plus has a slightly different motor mount angle so none of the EBB36 mount I could find would fit properly. I simply modified the tab on the bottom mount and changes the placement of the screw hole.
P
Printables
Dragon Burner vz hextrudort low plus Adapter
Dragon Burner vz hextrudort low plus Adapter mit Einschmelzgewinde.
P
Printables
Duet Roto Toolboard mount for the Vz_Hextrudort-Low extruder
This is a mount I designed for the Vz_Hextrudort-Low extruder and the Duet RotoToolboard. It's my second attempt as the prototype did not have enough strain relief for the big XT30_2+2 connector that the roto toolboard uses. This version…
P
Printables
Vz Hextrudort CW1 + Stealthburner adapter
Requires screws longer than standard – approximately 47 mm is the maximum length that will fit without interfering with the stealthburner. Tested only with the Vz Hextrudor Low Plus. This part is not shrinkage compensated. Print with…
P
Printables
Fly SHT36v3 and PUG Mount for VZHextrudort
I didn't find many Fly SHT36 V3 mounts that I liked, but really liked the model from SpaceKaseJase for his Mellow Fly SHT36 V3. I wanted to use the PUG system instead of the PG7 gland and mirrored it to have the mounting holes aligned to…
P
Printables
Filament Sensor (Endstop switch) Vz-HextrudORT PLUS
UPDATE 28.04.2025 FINAL VERSION I went back to the option with a single 4*2.5 PTFE tube going through. An m2*10 screw is used to fix it. A template for cutting the tube has also been added. ***** UPDATE 26.04.2025 The channel's shape has…
P
Printables
HextrudORT Low Motor EBB36/NH36 PUG Mount
A toolhead mount based around therick's WWG2 NH36/EBB36 PUG mount https://www.printables.com/model/968109-wwg2-nh36ebb36-pug-mount to make it fit with a Vz HextrudORT Low-Motor extruder. The original PUG download page (for the gland…
P
Printables
HextrudORT Low-PLUS Motor EBB36/NH36 PUG Mount
A toolhead mount based around therick's WWG2 NH36/EBB36 PUG mount https://www.printables.com/model/968109-wwg2-nh36ebb36-pug-mount to make it fit with a Vz HextrudORT Low-PLUS extruder. The original PUG download page (for the gland…
P
Printables
Hextrudort-Low Plus EBB36 CNLinko/PG7 Mount
EBB36 mount for Hextrudort-Low Plus extruder with rigid CNLinko/PG7 mount.
P
Printables
vz hextrudort short with moons stepper on vzprinthead nitehawk 36 mount
inspired by Svennixx's model but redesigned from scratch to put the nitehawk board up and to the left centering it on the toolhead rather than the motor. This is necessary because the heater terminals on the nitehawk interfere with the…
P
Printables
VZ HextruDort Pin Lock no text/ Bowden Tube adapter with less bite
Bowden Adapter has less bite so then filament can flow through with less resistance, pin lock has the pin lock text removed.
P
Printables
HevORT LGX Lite HextrudORT Carriage Mount (HD12/MGN9)
Original version for clip on fan or Dragon LC. 2022-06-13: Added version with integrated 40mm fan duct.
P
Printables
Nighthawk 36 Side mount adapters for Orbitor and Hextrudort for VZBOT printers or VORON printers running VZBOT style gantry.
Side mount adapters for Orbitor and Hextrudort for VZBOT printers or VORON printers running VZBOT style gantry.
P
Printables
Hextrudort CNC Low Umbilical Mount - EBB36 CNLinko
Per a user request, I alter the base mounting plate from my original design to work with a Hextrudort CNC Low Extruder Requires (5) M3 Heatset inserts and (3) M3x8 screws to attach the CNLinko Arm to the Extruder Mounting Plate. Spacers…
P
Printables
Hextrudort Plus Post Sensor
A sensor between Hextrudort Plus and filament meltzone for multiplexer operations. Uses a limit switch (without the metal tab) and a 5.5mm ball bearing. No screws are required for assembly as there is a holder for the switch that keeps it…
P
Printables
N4Plus Voron Mantis with Knomi Revamp V2 + VZ-HextrudORT Extruder + AD5XHotend + BTT-EBB42 + BTT-Eddy
This toolhead design is for sensorless homing & quick nozzle swap using AD5X Hotend better than E3D Revo Nozzle. Why i said it's better than E3D Revo Nozzle? When until certain usage, the nozzle started to have some filament leakage &…
P
Printables
EVA-Hextrudort Carriage Ender 3 V2
Modified the Eva Carriage so that it fits an Ender 3 V2. It uses the HextrudORT direct drive. The uploaded design is modified so that it fits an Dragonfly BMS hotend and BL-touch. I uploaded the Fusion and STEP file so that you can modify…
P
Printables
HextrudORT ERCF Mod For Mantis Toolhead
Want to use Mantis Toolhead: https://github.com/VoronDesign/VoronUsers/tree/master/printer_mods/Long/Mantis_Dual_5015 on my V2 with ERCF: https://github.com/EtteGit/EnragedRabbitProject and HextrudORT extruder:…
P
Printables
Voron V0.1 Mini Hextrudort
I was unhappy with MiniAB extruder and because I love hextrudort, I decided to make it work with my voron v0.1. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: Yes Filament: Prusament ABS, ASA,…
P
Printables
Contributo per EVA supporto Dragon e Zodiac per Vzbot ed estrusore Hextrudort
Ho adattato dei supporti Hextrudort EVA per montare le versioni Dragon hotend e zodiac hotend e montare delle fan 2510 e 3010. In seguito ho creato delle cover per coprire le fan sul frontale. le fan e le cover si tengono ai supporti con…
P
Printables
EVA 3 - VZ-HextrudORT Low extruder mounting plate
Moded EVA3 plate for LGX-Lite extruder to adapt VZ-HextrudORT Low extruder. Nothing special for printing or mounting, you can refer to EVA 3 carriage instructions for printing. During assembly it's necessary to unmount the extruder face…
P
Printables
Vz-HextrudORT Voron Stealthburner
Hello, I modified the LGX Lite Mod by Eytecz to mount a Vz-HextrudORT. It's just a small recess to adjust the filament tension. The rear component is from the LGx Lite mod. Suitable for everyone who has installed a Stealthburner. Original…
P
Printables
VZ-Hextrudort For Stealthburner
Hi, I have remixed the CB-C2 by kejar31 stealthburner tool head to fit the Vz-Hextrudort CNC. There are two versions below the Mellow Fly-SHT V2.0 Board or the EBB36. Everything can be printed without supports except for the Cable Door.…
P
Printables
VZ-Hextrudort For Stealthburner (door and tension screw fix)
Attention! the description will be updated soon (see updates as changelog) This remix replaces the printet standoffs with standoffs female to female 25mm ( like this and this together or similar m3x25) because they are narrower in…
P
Printables
Voron V0.2 Stealthburner for VZHextrudort
Created so people can use the Voron V0.2 Mini Stealthburner with a VZHextrudORT extruder
P
Printables
HappyHextrudORT Mounting Plate
HappyHextrudORT Mounting Plate designed to work with Annex Engineering's Aftersherpa Mini Cowling
P
Printables
EVA3 EBB42 Modular Mount for Orbiter 2.0 and VZHextrudort-Low
Modular mount that can be used with no extruder attachment if you have 7mm or more clearance, or attachment to the Orbiter 2.0 or the VZHextrudort-Low . BOM Item Count Description M3 x 5 Heat Inserts 5 or 6 M3 x 6 Counter Sunk 1 Front…
P
Printables
Vz-HextrudORT + ebb36 adapter for Voron Stealthburner
This is a newly designed adapter for the VZ-HextrudORT paired with an EBB36 CANBUS board. an ercf filament sensor is integrated (if you want) a cooler for the board (if you want) It should also fit the FLY SHT36, but unfortunately I can't…
P
Printables
HextrudORT for Hypercube Evolution
Was requested by a user so here it is. I'd consider it a work in progress as it was specially designed for my fairly custom printer, but may be a good starting point for others. It's been running well on my machine for a while now. Fits…
P
Printables
HevORT RIDGA HextrudORT - E3D
This is a remix of the recently released RIDGA HextrudORT 1.65 for Rapido but cut up to accept the E3D mount. I was so excited to try it out on my own that I made this! The original E3D HextrudORT was used as the base for the spliced…
P
Printables
Mantis 5015 Carriage for Vz Hextrudort and Beacon Abl (Probe)
I recreated the Mantis Carriage for the Dragon Hotend to mount the Beaon Probe. Only tested with the Dragon Hotend and the BambuLab Hotend! my Config (Bambulab Hotend) [bed_mesh] algorithm: bicubic speed: 800 mesh_min: 45, 45 mesh_max:…
P
Printables
CPAP TAP Goliath VzHextrudort Mantis
I modified my last Mantis TAP toolhead to now support Simon Vez's Goliath hotend. I'm using CPAP on this but it has the standard mantis fan mounts if you want to use the original Mantis 5015's, but you will need to get the correct ducts…
P
Printables
VZ-Hextrudort Sherpa Mini Front K-Brace for XOL2 on Voron Printers
Wanted to continue having a front brace on my xol2, when switching from mini sherpa to the wonderful mod made by churls the “Mellow VZ Hextrudort RIDGA Mini Sherpa” what a mouthful XD the “vz-sherpa” has a shorter body so it doesn't reach…
P
Printables
VZ-Hextrudort-Low + EBB36 mount for Voron Stealthburner
I have recently bought a VZ-Hextrudort-Low extruder and needed a new mount (along with a new upper Stealthburner body). Didnt find anything that I like and I was already satisfied with my SB mount so… I made a remix for that same mount.…
P
Printables
Vorxtrudort / Hextrudort NEMA 17 Stepper Adapter
Mostly made to work with VorxtrudORT . 4wall line, 40+%infill, 6 bottom top solid layer Rest all the BOM can be the same. Only need three extra M3x12 bolts for motor mounting that is it. Cheers. Similar to Sherpa Heavy, but do not require…
P
Printables
BMG gear and MR85 bearing test print for voron clockwork, sherpa, hextrudort, etc.
A quick test print to test tolerances to fit a BMG gear and MR85 bearing for extruders such as the Voron Clockwork 2, sherpa mini and Vz/Hextrudort. The test print is cropped out of the Voron Clockwork 2 motor plate. Print a few with…
P
Printables
Vz-HextrudORT + ebb36/fly-sht + PG7
Uses 4x m3 Voron spec heat inserts and a couple M3 screws. Also requires the nut for a PG7 gland, went this route because threads tended to be weak when printed. V1.1 - Added a new mount for the SHT-Fly V2 to accommodate the connector…
P
Printables
Eva 2.4 Hextrudort / Goliath Air Mount
I took the LGX mini mount, and modified it to fit the hextrudort. I then made a new mount for the goliath. Other files that were modified were the shield, bottom and back parts. All the stl's are there. I've included an "x endstop", that…
P
Printables
HextruDORT normal e Nema 17 motor
Modification to mount a NEMA 17 (pancake) motor with Hextrudort https://www.thingiverse.com/thing:5415148 https://www.thingiverse.com/thing:5826620 Print Settings Brims/Rafts ─ Yes Supports ─ Yes ( Wall Thickness ─ ≥1.2mm Top/Bottom…
P
Printables
VZ HextruDort - PIN LOCK
Bowden tube original Vz-HextruDort Clip PIN lock V1 - clip type 1 V2 - clip type 2 (pneumatic) V3 W.I.P. Print Settings Brims/Rafts ─ OPTIONAL Supports ─ Yes Wall Thickness ─ ≥1.2mm Top/Bottom Thickness ─ ≥1.2mm Infill ─ 30% Filament…
P
Printables
Vz-Hextrudort Horizontal Motor Mount
This makes it easier to mount a Can Bus PCB since the PCB and mount can be installed directly to the standoffs
P
Printables
Lightweight toolhead for Ratrig V-Core 3.1 with Goliath Short, VZ-Hextrudort and CPAP (MGN9H)
This toolhead is designed to be lightweight, yet very rigid. It was kept very simple, the complete head including cooling duct, belt tensioners, endstop and SuperPINDA mount consists of only six parts. The top plate (aluminum), the bottom…
P
Printables
HextrudORT NEMA 17 motor plate
I didn't have one of those fancy NEMA 14 LDO steppers so I designed a plate that fits a NEMA 17 motor.
P
Printables
Filament Cutter for hextrudort on XOL
Adapter plate to use filament cutter with hextrudort on xol
P
Printables
FLSUN SR Rapido + VzHextrudORT custom printhead
This is a mod for the FLSUN SR to mount the Phaetus Rapido HF Hotend on the Effector and use the parts of the original extruder to replace this thing with an Vz HextrudORT to create a good Direct Drive System for this machine. For this…
P
Printables
VZ-Hextrudort-Plus SHT36 V2 Canboard Mount
Hextrudort-low mount doesn't fit the plus, so I made this real quick.
P
Printables
Mantis MGN12 Carrige for Goliath Hotend VZ Hextrudort and Beacon3D
I Only Cut and fit for the Goliath lenght So Nothing Special I add also a split version to make the Belt installation but i see in the input shaper results it is not so stiff
P
Printables
EBB36 SHT36-v2.0-Hextrudort Mount Heat Inserts 3mm
I made a Small modify to the Original Part. Just addes 3mm Heatinserts and Removed the Logo because i like it Clean. Support is needed because of the Original Design.
P
Printables
Goliath EVA Goliath + Vz-Hextrudort of RatRig
I sought to harness the capabilities of the Goliath, EBB 1.2, and Vz-Hextrudort within a heated chamber, yet my quest for suitable solutions proved challenging. The only viable option I found was the full aluminum offering from Vzbot.…
P
Printables
![Xol Toolhead | EBB36 Umbilical Mount - VZ-Hextrudort-Low [M12 Cable Gland]](https://media.printables.com/media/prints/795812/images/6162862_5eb57d62-4ff5-44c5-95cb-b24b9b61f722_cad32f21-9500-4919-9498-b72602d5a957/whatsapp-image-2024-03-07-at-120132.jpeg)
Xol Toolhead | EBB36 Umbilical Mount - VZ-Hextrudort-Low [M12 Cable Gland]
EBB36 Mount for Xol Toolhead with VZ-Hextrudort with added M12 holder. (Cable Gland) In the holder part there is a hole for an M3 heatinsert. Also there is a groove for a zip tie Printed with standard voron part settings in CR3D ABS Carbon.
P
Printables
VZ Hextrudort LOW CNC EBB36 mount & VZ Toolhead PG7 Gland cable holder
After trying out another mount found here I noticed that the ebb36 was uncomfortably low. To point of risking a fire, the heater ports are too close to the VZ CNC Toolhead top plate. The can-board itself sticks out roughly 4mm above the…
P
Printables
Vz-Hextrudort (cnc/aluminum) Filament Sensor ECAS
Filament sensor and ECAS collet for vz-hextrudort extruder. Filament entering the extruder gears is the switch, this does not contact the filament. Something about only working with LDO motors because of the stepper ear thickness being…
P
Printables
HextrudORT Cutter (beta)
HextrudORT Cutter (beta) for VZ MGN9 Printhead BOM: Knife No.4 Pen Spring 2x M2,5x10 screws + nuts M3x25 screw 2x M2x20 screws
P
Printables
VZ Hextrudort LOW CNC EBB 36 mount for Printed VZ Printhead
The length of the EBB mount is adapted to the printed version of the vz print head. It is very tight but everything except the screw terminal of the heater is accessible.
P
Printables
VZ hextrudort adapter for Rook 2020
Adapter plate for Vez's extruder for use with rook 2020
P
Printables
VZ-Hextrudort For Stealthburner (with cable door and ptfe tube guider)
Added ptfe tube guider helping filament enter vz-hextrudort-low version 1 easiler. Added Cable door for hiding the wire
P
Printables
Archetype Blackbird Toolhead (WIP) - bambulab hotend with 30mm fan, VZ-hextrudort, Fysetc CNC TAP, custom faceplate, EBB36
This is a work in progress project from my side, so there might still be some small bugs. I made a custom version of the new archetype blackbird toolhead for my needs. I have created a new core for my needs, to get use of a bambulab…
P
Printables
Archetype Blackbird Toolhead (WIP) - NF - CRAZY Volcano hotend with 30mm fan, VZ-hextrudort, Chaoticlab CNC TAP, custom faceplate, EBB36 Mount
This is a work in progress project from my side, so there might still be some small bugs. I created a custom version of the new archetype blackbird toolhead for my needs. I created a new core, to get use of a nf-crazy volcano hotend in…
P
Printables
Vz-HextrudORT Upgrade for Prusa MK3S+/MK3.5
Hi everyone, i upgraded my Prusa MK3.5 Extruder for better print quality to a Vz-HextrudORT-LOW and would like to share it with you. If you need a bowden tub adapter E.g. a MMU, you can download this directly from VzBoT3D's Github page:…
P
Printables
VZ-Hextrudort Adaptor for the RatRig toolhead
Hi! Here is an adaptor plate which enables mounting the VZ-Hextrudort extruder to the RatRig Toolhead aluminium top plate. Mounting is done by countersunk M3 bolts as follows: add 2 x 6 mm bolts to the exterior countersunk holes;…
P
Printables
Front Plate Vz-HextrudOrt with ECAS04 Adapter
I remixed the Front Plate from Dragi2K for ECAS04 Insert Adapter instead of the PC4 M10 for the PTFE tube. Has fewer leverage and looks much better. It fit for me perfectly. You have to press it in with a little force. There is no play…
P
Printables
Hextrudort-Low PLUS EBB 36 mount with strain relief
have adjusted the bracket so that ebb 36 and strain relief is not crooked but is vertical
P
Printables
XOL horizontal drag chain EBB36 For VZ-Hextrudort
Other required parts can be downloaded here https://www.printables.com/model/703915-horizontal-drag-chain-ebb36-xol