1 / 1
Hextrudort Plus Post Sensor
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
A sensor between Hextrudort Plus and filament meltzone for multiplexer operations.
Uses a limit switch (without the metal tab) and a 5.5mm ball bearing.
No screws are required for assembly as there is a holder for the switch that keeps it in place when sandwiched between the extruder and toolhead. Longer screws are needed to mount the extruder as the sensor is 9mm thick. The ultra low profile screws here worked for me.
This is desigend around the vzbot cnc toolhead but is also great with the printed version. Other toolheads should work just fine where the hextrudort plus can be mounted.