1 / 6
Mantis 5015 Carriage for Vz Hextrudort and Beacon Abl (Probe)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mantis 5015 Carriage for Vz Hextrudort and Beacon Abl (Probe)
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 52
- Wydruki
- 1
- Wyświetlenia
- 947
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 3)Remiksy (0)Kolekcje (17)Powiązane
I recreated the Mantis Carriage for the Dragon Hotend to mount the Beaon Probe. Only tested with the Dragon Hotend and the BambuLab Hotend!
my Config (Bambulab Hotend)
[bed_mesh]
algorithm: bicubic
speed: 800
mesh_min: 45, 45
mesh_max: 310, 310
probe_count: 50, 50
[beacon]
serial: your serial ID
x_offset: 0 # update with offset from nozzle on your machine
y_offset: 23.5 # update with offset from nozzle on your machine
mesh_main_direction: x
mesh_runs: 2