1 / 4
Fly SHT36v3 and PUG Mount for VZHextrudort
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mellow Fly SHT v3 mount for VZHextrudort and using a PUG gland
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 284
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v3.0
I didn't find many Fly SHT36 V3 mounts that I liked, but really liked the model from SpaceKaseJase for his Mellow Fly SHT36 V3. I wanted to use the PUG system instead of the PG7 gland and mirrored it to have the mounting holes aligned to mount to the back of a VZHextrudort.
You'll need the following:
- 4x M3x8mm screws to mount the standoffs to the NEMA14 and the mount to the standoffs (I used a couple of 20mm ones from https://www.printables.com/model/601831-m3-standoff-spacer-female-female-round-4-30mm)
- 2x M3x6mm screws to mount the SHT36 toolhead board
- 1x PUG gland for the appropriate cable size you'll be using ( PUG (Parametric umbilical gland)
- 1x PUG bracket from WWG2 NH36/EBB36 PUG mount (attached it here for your convenience)
- 2x M3 Heatset inserts for the PUG mount