1 / 4
Fly SHT36v3 and PUG Mount for VZHextrudort
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mellow Fly SHT v3 mount for VZHextrudort and using a PUG gland
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 27
- Makes
- 0
- Views
- 284
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- GNU General Public License v3.0
I didn't find many Fly SHT36 V3 mounts that I liked, but really liked the model from SpaceKaseJase for his Mellow Fly SHT36 V3. I wanted to use the PUG system instead of the PG7 gland and mirrored it to have the mounting holes aligned to mount to the back of a VZHextrudort.
You'll need the following:
- 4x M3x8mm screws to mount the standoffs to the NEMA14 and the mount to the standoffs (I used a couple of 20mm ones from https://www.printables.com/model/601831-m3-standoff-spacer-female-female-round-4-30mm)
- 2x M3x6mm screws to mount the SHT36 toolhead board
- 1x PUG gland for the appropriate cable size you'll be using ( PUG (Parametric umbilical gland)
- 1x PUG bracket from WWG2 NH36/EBB36 PUG mount (attached it here for your convenience)
- 2x M3 Heatset inserts for the PUG mount