P
PrintablesPsych0h3ad
- Downloads
- 809
- Likes
- 62
- Rating
- 5
Search results: sht36
49 models
P
PrintablesBryan Veloso
Turbiter with EBB36/SHT36 Side Mount
This modification allows for mounting of the CAN board on the side of the Turbiter. You will need 2 M3 heat set inserts to mount the board. As a Voron 2.4 owner, I wanted to run the Turbiter mod for the Orbiter 2.0 so I could run the…
- Downloads
- 278
- Likes
- 47
- Rating
- 5
P
PrintablesSamuel Nink
Orbiter V2 / FLY SHT36 MAX V3 mount with cable guide
Orbiter V2 / FLY SHT36 MAX V3 mount with cable guide. The board is mounted with 3x 8mm M3 long Hex nuts. 4mm black PTFE is used to hold the CAN cable.
- Downloads
- 191
- Likes
- 24
- Rating
- 5
P
PrintablesSpaceKaseJase
Mellow Fly SHT36 V3 Wristwatch Mount PG7
**New Editions: I redesigned both PG7 left and right side mounts to include an M2 nut for the thread tightener instead of a heat set insert (which kept getting pulled out by the M2 screw due to there not being enough plastic to hold it).…
- Downloads
- 165
- Likes
- 33
- Rating
- 5
P
PrintablesSchlonky
Voron V0.2 Mellow FLY SHT36V2 mount
Modified Umbilical Toolhead mount, to fit a Mellow FLY SHT36V2 on the Voron 0.2 Mini Stealthburner, with strain relief. Heater wires might be a bit tight, could possibly resolder the terminal screws on backwards.
- Downloads
- 163
- Likes
- 31
- Rating
- 4.5
P
PrintablesJR Lomas
SHT36 Cover
Here is a SHT36 cover. It covers the, incredible bright, LEDs that come on the board, and protects cables from snagging.
- Downloads
- 163
- Likes
- 21
- Rating
- 5
P
Printableszuzzi76
Sht36v2 mount for printhead vzbot
Support for sht36v2 mounted behind the stepper motor, To ensure that the PCB can be positioned behind the stepper motor I also modified some parts of the vzbot printhead. BOM: 2x spacer 12mm 3x m3x8 1x m3x6 1x insert nut M3 x 4
- Downloads
- 159
- Likes
- 25
- Rating
- 0
P
Printables서준 박
ebb36/sht36 canbus cooler
I made it stand according to 3007 or 3006 fans.You need some glue so that the pan doesn't come out
- Downloads
- 153
- Likes
- 25
- Rating
- 0
P
PrintablesSputnikOC3D
SHT36 Max V3 Toolboard cover Stealthchanger Toolhead cover
SHT36 Max V3 Toolboard cover Stealthchanger Toolhead cover Modified from an EBB36 design, specifically for the MELLO Fly SHT36 Max V3 board on my Umbilical toolboard mount - pictured - for WWG2 Extruders
- Downloads
- 148
- Likes
- 28
- Rating
- 5
P
Printablesshoobert
Orbiter V2.0 Turbiter BTT EBB36/FLY SHT36 CANBUS toolhead board side mount
GENERAL INFORMATION THIS CONTAINS REMIXED FILES FROM THE ORBITER TURBITER PROJECT: https://www.orbiterprojects.com/turbiter/ PLEASE NOTE THAT THE MOUNT MIGHT NOT BE COMPATIBLE WITH THE SHT36 BOARD AS THE CANBUS WIRE FLANGE WAS NOT…
- Downloads
- 147
- Likes
- 37
- Rating
- 0
P
PrintablesBotio
EBB36/SHT36 HGX Lite front mount plate with short cable strain relief
EBB36/SHT36 HGX Lite front mount plate with short cable strain relief
- Downloads
- 125
- Likes
- 12
- Rating
- 0
P
PrintablesEric
EBB36/SHT36 LGX Lite front mount plate with short cable strain relief
This is a remix of MaroonOut09's and KayosMaker's CAN toolhead board mount. It has the same cable strain relief height as KayosMaker's design, but with the mirrored mounting orientation of MaroonOut09's design, so that it can mount to the…
- Downloads
- 105
- Likes
- 10
- Rating
- 0
P
Printablesbalthisar
Micro Swiss Direct Drive CANBUS EBB36 (Fly-SHT36) Mount (optional runout included!)
If you're using Micro Swiss' direct drive and you want to upgrade your printer toolhead to CANBUS, then this mount is likely to make you happy! It mounts directly and simply to the existing direct drive stepper motor and positions the…
- Downloads
- 104
- Likes
- 15
- Rating
- 0
P
Printablesforsaken_candy
EBB36 (SHT36) Orbiter v2 mount w/ USB strain relief
EBB36/SHT36 mount for Orbiter v2. Remix changes: Moved the strain relief so it can be used if running over USB instead of CAN. Made it longer to accommodate reinforced USB plugs. Replaced nut holes with heatset insert holes (use M3 x 5mm…
- Downloads
- 101
- Likes
- 13
- Rating
- 0
P
Printablesbabendums
VZ-Hextrudort-Plus SHT36 V2 Canboard Mount
Hextrudort-low mount doesn't fit the plus, so I made this real quick.
- Downloads
- 99
- Likes
- 11
- Rating
- 0
P
PrintablesAgentL3r
Mellow Fly SHT36 V3 CANboard Mount for Xol and non-Xol
A modified version of KayosMaker's selection of toolboard mounts specifically to better fit the Fly SHT36 V3. The modifications include clearence for the rear-mounted USB-C port, and pockets for access/clearence to the various…
- Downloads
- 95
- Likes
- 8
- Rating
- 0
P
PrintablesLNC3D
Direct Carriage Mount EBB/SHT36
Both mounted behind the extruder and the carriage for a more stable result with the ADXL.
- Downloads
- 93
- Likes
- 21
- Rating
- 0
P
PrintablesArakon
SHT36/EBB36 VZ-Hexdrutort mount (more inserts)
Don't apply too much pressure when inserting, or they will deform. Print as oriented with Tree supports, more walls will strengthen the overall structure. Also fits the EBB36, although not quite as prettily.
- Downloads
- 92
- Likes
- 13
- Rating
- 0
P
PrintablesPsych0h3ad
- Downloads
- 86
- Likes
- 13
- Rating
- 0
P
PrintablesLuke N
EBB36 / SHT36 metal tap mount G2SA (Orbiter) G2E
more sturdy with 4 mounting points now! I suggest 4 aluminum stand offs! I designed this for XOL; G2SA orbiter pattern, and Vitalii metal tap! Update: added overmold for proper SHT36 support
- Downloads
- 84
- Likes
- 14
- Rating
- 0
P
PrintablesAndrew Wong
Voron Stealthburner Orbiter 1.5 with Filament Sensor, SHT36 or EBB36 Board
Use brass hex spacers to provide a rigid mounting for the SHT36 PCB and the PG7 umbilical cable mount!
- Downloads
- 83
- Likes
- 8
- Rating
- 0
P
Printablesdevxmax
VZBOT SHT36 v3 Mount plate LDO NEMA14
M3x4x4.2 - insert nut - 4 pcs
- Downloads
- 80
- Likes
- 6
- Rating
- 0
P
PrintablesHo Lee Shit
EBB36 SHT36-v2.0-Hextrudort Mount Heat Inserts 3mm
I made a Small modify to the Original Part. Just addes 3mm Heatinserts and Removed the Logo because i like it Clean. Support is needed because of the Original Design.
- Downloads
- 69
- Likes
- 8
- Rating
- 5
P
PrintablesLNC3D
FLY-SHT36 Can Mount
This model is for mounting it directly at the back of a 36mm pancake motor. I have nowhere else to put it. I don't want it to be bulky and big so I designed my own. I added a cable tie mount to remove the strain on the connector itself…
- Downloads
- 67
- Likes
- 14
- Rating
- 0
P
PrintablesYL Y
VZbot CAN board SHT36 mount
该型号适用于VZbot CNC刀头，安装SHT36 CAN板。(打印版本) 需要两个M3热熔螺母
- Downloads
- 63
- Likes
- 4
- Rating
- 0
P
PrintablesTushonk
Toolhead board DIN mount (EBB36/SHT36/NiteHawk-36)
To be used with https://www.printables.com/model/472505-din-rail-bracket-redux Uses standard M3 hardware Thanks to Brazuka for the inspiration
- Downloads
- 53
- Likes
- 9
- Rating
- 0
P
PrintablesPaul Stephenson
VzBot 330 AWD Mellow SHT36 v3 Mount
I wanted a nicer Mellow SHT36 v3 mount for my Vz330 AWD. I've got the umbilical coming out horizontally (along with my CPAP Tube). I have a piece of stainless TIG wire supporting it.
- Downloads
- 48
- Likes
- 5
- Rating
- 0
P
PrintablesAndrew Wong
Mellow SHT36 v3 and Orbiter v2.5 PCB Mount
Thanks for a good design and print. Extended cable arm to support CANbus connector (2+2)
- Downloads
- 47
- Likes
- 8
- Rating
- 0
P
PrintablesRPK3D
Mellow SHT36 Cooling
Since my printer has an enclosure the SHT36 toolboard gets quite warm, so I decided to actively cool it. For the cooling the following is needed: A 30x30 fan is needed e.g. -->…
- Downloads
- 46
- Likes
- 6
- Rating
- 0
P
PrintablesJonas Burkhard
Voron Stealthburner SHT36 V3 bowden setup
Mounting bracket for the voron stealthburner to mount the SHT36 V3 can bus toolhead board in the bowden configuration. I also adjusted the cable cover. I have it installed on a voron legacy, but i think it shoud be compatible with other…
- Downloads
- 46
- Likes
- 4
- Rating
- 0
P
PrintablesMike Rainbow
Mellow SHT36-V3 LDO Orbiter 2.5 Mount
Mellow SHT36-V3 LDO Orbiter 2.5 mount Need 2 20mm m3 standoff 2 m3 insets shallow ones couldnt find one that supported the v3 version so I made this I wanted a velcro strap not zip ties ABS takes about 25 mins @ 300mm 7.5k I have added…
- Downloads
- 41
- Likes
- 4
- Rating
- 0
P
PrintablesEdwin
Orbiter v2 Fly SHT36 mount
Mount for sht36. Needs 2x 18mm standoff and m3x8 and m3x6 bhcs. Changed holes a bit to fit standard m3 heatsets better an lifted the board 4mm.
- Downloads
- 40
- Likes
- 3
- Rating
- 0
P
Printableskent
EBB36/SHT36 PG7 Mount behind NEMA14 stepper
Mounts tilted between spacers from: https://github.com/chirpy2605/voron/tree/main/general/PCB_Mounts/STLs/G2SA
- Downloads
- 37
- Likes
- 6
- Rating
- 0
P
PrintablesMF-SHROOM
Orbiter 2 SHT36 Mount (Right Side)
I created this model in order to use my SHT36v3 toolboard with a VZBOT CNC toolhead. I found that the existing EBB36 mounts out there were not suitable for the SHT36 and I was unsatisfied with the approach other designs took in terms of…
- Downloads
- 35
- Likes
- 6
- Rating
- 0
P
Printablesbroken-brick440
NF-Sunrise Small Projection Area 5015 Blower Fan Duct + Eddy Probe Mount + SHT36 Mount
For the different sizes of 5015 blower fans, I have 3 types of ducts with different opening sizes. If you don't see a suitable opening, please let me know the size. Example: 200_150 has a 20.0mm x 15.0mm opening. I designed it with a CHC…
- Downloads
- 29
- Likes
- 1
- Rating
- 0
P
PrintablesMonkichi57
Fly SHT36v3 and PUG Mount for VZHextrudort
I didn't find many Fly SHT36 V3 mounts that I liked, but really liked the model from SpaceKaseJase for his Mellow Fly SHT36 V3. I wanted to use the PUG system instead of the PG7 gland and mirrored it to have the mounting holes aligned to…
- Downloads
- 27
- Likes
- 3
- Rating
- 0
P
Printablesthedsi
MELLOW SHT36 v3 cover (voron logo)
It's just a cable cover for the MELLOW SHT36 v3 . My toolhead look cleaner with that .
- Downloads
- 16
- Likes
- 2
- Rating
- 0
P
PrintablesSteve Miles
Qidi X-Smart 3 - Mount for the Mellow Fly SHT36v3 with Eddy. Also includes 3xNeopixel mount.
Created to mount the Mellow Fly SHT36v3 to the Qidi X-Smart 3. Includes. 1. Backplate. Fits to exiting tool board mounts 2. Eddy Mount (Adjustable. Aim for 5-6mm from nozzle height) Needs M3 heat inserts and M3x8/10 bolt 3. Cover. Space…
- Downloads
- 12
- Likes
- 1
- Rating
- 0
P
PrintablesHassla
EVA 3 - Bottom Normal - LED - SHT36 V3 MAX
A Remix of the normal bottom horn, 2 Voron0 LED mounts and a SHT36 Eddy Sensor mount were added. 1x Voron 0 LEDs 1x FLY SHT36 V3 MAX 2x M3xL3x4.5 Heatinsert x_offset: 0 y_offset: 26 z_offset: 3.64 I've used 0.1mm² wire to connect the LEDs…
- Downloads
- 12
- Likes
- 3
- Rating
- 0
P
Printablestgayar
Dragon Burner PCB Holder - SHT36 v3 Trident + Sherpa Mini
On the SHT36v3, contrary to manufacturer's instructions, be sure to specify in your config : [lis2dw] cs_pin: SHT36:gpio12 spi_bus: spi0_gpio4_gpio3_gpio2 axes_map: y, -z, x
- Downloads
- 12
- Likes
- 0
- Rating
- 0
P
PrintablesFelix ✨Chaos✨
Orbiter V2 X FLY SHT36 V3
Clean up your toolhead wiring with this custom mount for the Mellow FLY SHT36 V3 toolboard, specifically designed to fit the Orbiter Extruder ! This mount features a lightweight hex-grid design that not only looks great but also ensures…
- Downloads
- 11
- Likes
- 1
- Rating
- 0
P
PrintablesOwen
Khepri Toolhead — Sphinx Remix for Crossbow & SHT36 V3 MAX
A Sphinx remix for Crossbow, Rapido X, Sherpa Mini and SHT36 V3 MAX , with a split toolboard bracket, reinforced belt clamps and 10° CPAP cooling. Choose your duct SLS: print parts 01–08 with one-piece duct 03. FDM: replace 03 with 03a +…
- Downloads
- 11
- Likes
- 5
- Rating
- 0
P
PrintablesDark Mindset
Suporte - Mellow Fly SHT36 (V3) - MiniSB
Este é um suporte de montagem personalizado projetado com foco em leveza e rigidez estrutural. O design "skeletonized" (vazado) reduz significativamente o uso de material e o peso final da peça sem comprometer a resistência, tornando-o…
- Downloads
- 7
- Likes
- 0
- Rating
- 0
P
PrintablesEntharion
Sherpa Mini SHT36 V3 toolhead board mount
Background I wanted to swap from a Voron StealthBurner with SB2209 can (RP2040) to something more lightweight and compact. So I chose the A4T toolhead as a basis. The Sherpa mini and Dragon HF hotend (+MZE) were already in my possession,…
- Downloads
- 4
- Likes
- 2
- Rating
- 0
P
PrintablesChristian Böttger
Mount for Mellow Fly SHT36 V3 on gantry/toolhead of Geeetech A30 (non-Pro, -M, -T)
Use the .3mf files, not the STL, the STL might not have the necessary cutouts and holes!! I replaced the original GTM32 Pro VD board of my (very old) Geeetech A30 with a Mellow Fly DP5 board and replaced the old toolhead connection PCB…
- Downloads
- 3
- Likes
- 0
- Rating
- 0
P
Printablesthedsi
MELLOW FLY SHT36v3 cover with E3NG logo
It' a simple remix of my voron cover for MELLOW FLY SHT36v3 with Ender3 NG logo . Use 2x M3x25 SHCS
- Downloads
- 3
- Likes
- 0
- Rating
- 0
P
Printablesesm
SHT36v3 Electronics Bay Mount for Sovol Zero
I added a 100W chamber heater to my Sovol Zero, which ended up becoming a little bit of a project. I needed to be able to control the 12V fans and heater element, and didn't have enough spare ports on the mainboard , so I used a Fly…
- Downloads
- 1
- Likes
- 0
- Rating
- 0
P
PrintablesYevhen Kifiak
HeroMe 7.4 SHT36 mount
v10 file - restored original shoulder length
- Downloads
- 1
- Likes
- 0
- Rating
- 0
P
Printables
Mellow SHT36-V3 LDO Orbiter 2.5 Mount
Mellow SHT36-V3 LDO Orbiter 2.5 mount Need 2 20mm m3 standoff 2 m3 insets shallow ones couldnt find one that supported the v3 version so I made this I wanted a velcro strap not zip ties ABS takes about 25 mins @ 300mm 7.5k I have added…