1 / 3
Goliath EVA Goliath + Vz-Hextrudort of RatRig — zdjęcie 1
1 / 3

Goliath EVA Goliath + Vz-Hextrudort of RatRig

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A EVA printhead with the Goliath hotted and the Vz-Hextrudort.

Ocena
0 / 5
Polubienia
6
Pobrania
67
Wydruki
0
Wyświetlenia
1269
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

I sought to harness the capabilities of the Goliath, EBB 1.2, and Vz-Hextrudort within a heated chamber, yet my quest for suitable solutions proved challenging. The only viable option I found was the full aluminum offering from Vzbot. However, it lacked an integrated tension system and required an external fan. Undeterred, I took matters into my own hands, deciding to modify the EVA toolhead, resulting in the creation of this innovative solution.

 

This whole contraption is meant for a heated chamber, so I needed to adjust the EVA3 mount to include an aluminum plate so the cooling from the Vz-Hextrudort would work with the short Goliath. Also, the Vz-Hextrudort now cools the tool-board and the back of the stepper through the extra aluminum plate with some heat-conductive mat

I printed my parts in PET-CF for temperature resistance.

As for assembly, please follow the STEP file. This adjusted EVA is meant to work with the standard 5xM3 inserts.

The hotend is a bit shorter, so you gain some extra height; keep in mind that now other fan bottoms will not fit anymore.

 

Keep in mind that this model requires 2 CNC'ed plates to function correctly!



 

 

 

Tagi