Filament Sensor (Endstop switch) Vz-HextrudORT PLUS
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Filament Sensor (Endstop switch) Vz-HextrudORT PLUS
- Ocena
- 5 / 5
- Polubienia
- 51
- Pobrania
- 158
- Wydruki
- 2
- Wyświetlenia
- 1100
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
UPDATE 28.04.2025 FINAL VERSION
I went back to the option with a single 4*2.5 PTFE tube going through. An m2*10 screw is used to fix it. A template for cutting the tube has also been added.
*****
UPDATE 26.04.2025
The channel's shape has been changed. A 4*3mm PTFE tube is inserted from above, 4*2 from below (for better access to the gears)
*****
UPDATE 23.04.2025
I opted out of a single piece of PTFE tube with a cutout. Now the model uses 2 pieces of PTFE tube
*****
This is the Filament Sensor (limit switch) for Vz-HextrudORT PLUS. I have developed it for use with the PICO MMU.
BOM:
- 1 steel ball 4.5mm diameter
- 2 screws and nuts M2*10 for switch or 2 screws M2.5*8 and tap for thread (Necessarily!)
- 2 screws M3*8 (1 - 1 tube version)
- 1 screw M2*10 (1 tube version)
- 1 micro switch type KW10-Z0
- PTFE tube:
- 4mm OD, 3mm ID, 4mm OD, 2mm ID (2 tubes version) or 4mm OD, 2.5mm ID (1 tube version)
I recommend you do the 1-tube version - it works perfectly.