vz hextrudort short with moons stepper on vzprinthead nitehawk 36 mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This allows the use of a nitehawk 36 toolboard with a vz hextrudort short on a cnc vztoolhead.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 177
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
inspired by Svennixx's model but redesigned from scratch to put the nitehawk board up and to the left centering it on the toolhead rather than the motor. This is necessary because the heater terminals on the nitehawk interfere with the cpap/fan mount on the back of the toolhead otherwise.inspired by Svennixx's model but redesigned from scratch to put the nitehawk board up and to the left centering it on the toolhead rather than the motor. This is necessary because the heater terminals on the nitehawk interfere with the cpap/fan mount on the back of the toolhead otherwise.
This may work with EBB36 or SHT36 but I don't have one to test out. Let me know if you try it.