1 / 1
vz hextrudort short with moons stepper on vzprinthead nitehawk 36 mount — image 1

vz hextrudort short with moons stepper on vzprinthead nitehawk 36 mount

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This allows the use of a nitehawk 36 toolboard with a vz hextrudort short on a cnc vztoolhead.

Rating
0 / 5
Likes
1
Downloads
13
Makes
0
Views
178
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

inspired by Svennixx's model but redesigned from scratch to put the nitehawk board up and to the left centering it on the toolhead rather than the motor. This is necessary because the heater terminals on the nitehawk interfere with the cpap/fan mount on the back of the toolhead otherwise.inspired by Svennixx's model but redesigned from scratch to put the nitehawk board up and to the left centering it on the toolhead rather than the motor. This is necessary because the heater terminals on the nitehawk interfere with the cpap/fan mount on the back of the toolhead otherwise.

This may work with EBB36 or SHT36 but I don't have one to test out. Let me know if you try it. 

Tags