1 / 20
Sapphire Plus Toolhead a bit of EVA2, VZ-BOT, Hevort with a Clicky Probe NF-Crazy Hotend — image 1
1 / 20

Sapphire Plus Toolhead a bit of EVA2, VZ-BOT, Hevort with a Clicky Probe NF-Crazy Hotend

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

My new Sapphire Plus Toolhead for NF-Crazy Hotend. Please Note that the Bed has to be relocated by about 36mm in y-…

Rating
0 / 5
Likes
28
Downloads
106
Makes
1
Views
2,673
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

My new Sapphire Plus Toolhead for NF-Crazy Hotend.

Please Note that the Bed has to be relocated by about 36mm in y- direction and you are loosing about -10mm in y travel, -5mm in x travel.

Klicky Probe using 7x3x2mm Magnets

Performing pretty well, printing at 25k accel up to 400mms.

[include klicky-probe.cfg] into printer.cfg (As this is my config there is a Homing override inkl. Stepper current set.=

Print Settings

Printer:

Sapphire Plus

Rafts:

No

Supports:

No

Resolution:

0,2

Infill:

40%

Filament:

Esun ABS, PETG Post-Printing =============

Category: 3D Printer Parts

Tags