Sapphire Plus Toolhead a bit of EVA2, VZ-BOT, Hevort with a Clicky Probe NF-Crazy Hotend
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My new Sapphire Plus Toolhead for NF-Crazy Hotend. Please Note that the Bed has to be relocated by about 36mm in y-…
- Ocena
- 0 / 5
- Polubienia
- 28
- Pobrania
- 106
- Wydruki
- 1
- Wyświetlenia
- 2673
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
My new Sapphire Plus Toolhead for NF-Crazy Hotend.
Please Note that the Bed has to be relocated by about 36mm in y- direction and you are loosing about -10mm in y travel, -5mm in x travel.
Klicky Probe using 7x3x2mm Magnets
Performing pretty well, printing at 25k accel up to 400mms.
[include klicky-probe.cfg] into printer.cfg (As this is my config there is a Homing override inkl. Stepper current set.=
Print Settings
Printer:
Sapphire Plus
Rafts:
No
Supports:
No
Resolution:
0,2
Infill:
40%
Filament:
Esun ABS, PETG Post-Printing =============
Category: 3D Printer Parts