HevORT nema 23 Z axis Motormounts
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Its a Mod to use Nema 23s for the Tripple Z V2.5 and 2.6 . Not easy to change heights . Ballskrew Position is the same.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 46
- Makes
- 0
- Views
- 660
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
You have to get your Extrusions leghts right its not that easy to Change.
Draw it first in Cad to get the right lenghts.
Frame should be Blind-jointet
For now its only for 1204 Ballskrews eventually i will mod it for 1605 if that design works .
Could be made with bearing 3001 2RS 12x28x12 mm and axialbearing 51201 12x28x11 mm
I have printed it out but no time to install it now.
Bearings fit is nice at my parts in ABS scaled to 100.1%
Bom is
3x Axialbearing 51100 10x24x9 mm
3x Bearing 3000 2RS 10x26x12 mm
3x M10x1mm Nut
M10 Washers or better would be springwahers for spacing between Coupling an M10 Nut
12x Heatset M5x9,5
12x M5x14 skrew for motor
6x M4x60 Srews
6x Nut M4
M6 Extrusion Nuts and Skrews
3x Coupling for SFU1204 = 8 mm to your steppershaft size
Bom is not tested jet
If u have potential for better Solutions please share it with me.
