1 / 3
HevORT nema 23 Z axis Motormounts — zdjęcie 1
1 / 3

HevORT nema 23 Z axis Motormounts

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Its a Mod to use Nema 23s for the Tripple Z V2.5 and 2.6 . Not easy to change heights . Ballskrew Position is the same.

Ocena
0 / 5
Polubienia
10
Pobrania
46
Wydruki
0
Wyświetlenia
660
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

You have to get your Extrusions leghts right its not that easy to Change.

Draw it first in Cad to get the right lenghts.

Frame should be Blind-jointet 

For now its only for 1204 Ballskrews  eventually i will mod it for 1605 if that design works .

Could be made with bearing 3001 2RS 12x28x12 mm and  axialbearing 51201 12x28x11 mm

I have printed it out but no time to install it now.

Bearings fit is nice at my parts in ABS scaled to 100.1%

Bom is 

3x  Axialbearing 51100 10x24x9 mm  

3x  Bearing 3000 2RS  10x26x12 mm

3x  M10x1mm Nut

M10 Washers or better would be springwahers for spacing between Coupling an M10 Nut

12x  Heatset M5x9,5 

12x  M5x14 skrew for motor 

6x  M4x60 Srews

6x  Nut M4

M6 Extrusion Nuts and Skrews 

3x Coupling for SFU1204 = 8 mm to your steppershaft size 

Bom is not tested jet 

If u have potential for better Solutions please share it with me.

 

Tagi