1 / 2
A shim for Prusa Advanced Filtration - Core One Retrofit
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a model of a shim for Prusa Advanced Filtration - Core One Retrofit by EvoDesigns
- Rating
- 5 / 5
- Likes
- 28
- Downloads
- 88
- Makes
- 5
- Views
- 1,010
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution
This is a model of an extra shim for Prusa Advanced Filtration - Core One Retrofit by EvoDesigns. After printing the bracket and mounting it on the back of the Core One I've noticed, that there's a significant space between the filter and the printer's back wall (about 3 to 3,5 mm).
So I've created a matching shim, that can be put between the printer and the bracket and it presses the filter firmly to the bracket and creates a better seal so the air is only being sucked from the inside of the printer.
