1 / 3
2003-2008 Toyota Corolla A/C Air Vent Shim
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Air vent shim to replace the worn-out ones on a 9th Corolla and stop floppy vents.
- Ocena
- 0 / 5
- Polubienia
- 32
- Pobrania
- 216
- Wydruki
- 1
- Wyświetlenia
- 2357
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (25)Powiązane
Air vent shims designed specifically for a 2005 Corolla, but should work with other 2003-2008 Corolla models. To install, pull up on the vents then outwards until they come out, then slot into the recess on the side of the air vent. After that push them in and they'll stop flopping around while driving.
For this print, I used PETG for better heat resistance, though TPU may be suitable as well for a softer feel. I printed at a layer height of 0.1mm, but your mileage may vary on other heights.