Liczymy pasujące modele…
So the problem you run into with 1990s cars that next to no one wants is, well, just that. Parts are near impossible to find at times due to demand not existing. Tried to find replacement pieces for the shifter on my 1990 Geo Prizm hatch…
Wydruk około 1,43 €–1,75 € nettoWstępna wycena jednego wariantu
Toyota Corolla AE86 Trueno, famous from Initial D Print the car and 4 wheels, might need supports for the exhaust tip Original model from sketchfab: https://skfb.ly/o8CNI Check out my print-in-place optimized version of an AE86:…
Air vent shims designed specifically for a 2005 Corolla, but should work with other 2003-2008 Corolla models. To install, pull up on the vents then outwards until they come out, then slot into the recess on the side of the air vent. After…
Snug-fitting cup and phone holder liners designed specifically for a 2005 Corolla, but should work with other 2003-2008 Corolla models. I am aware the top rounded corners of the phone holder liner doesn't quite match the car's corner…
Print with ASA, any brand should work. Print with textured plate. Sliced using Bambu Slicer. Printed on an X1C.
USE NEW V2 FILES First version had split lower part for faster/easier reprint in case of broken part (again) but it turned out it is also super weak point of whole part at the same time. New V2 version has lower part as one piece and…
Had some coffee spilled in the car. So I made a cup holder for the inner central tray, took Starbucks' cups as a model base. Fits trays 15x15cm.
Keystone Port Panel for Toyota Corolla Head Unit Replaces Toyota Corolla E120 2004-2008 | Part Number: 83910-02070 I recently replaced my stock head unit with a BOSS BE7ACP-FT and designed this panel to cleanly integrate the USB ports…
XXXC Corolla badge for TE72 and KE70 corolla sedans with quad headlight grilles. Uses M6x1.0 bolt.
Toyota GR Corolla Wall Art; can be scaled easily and can be hung or stand alone. I also take requests
Keystone Port Panel for Toyota Corolla Head Unit Replaces Toyota Corolla E120 2004-2008 | Part Number: 83910-02070 I recently replaced my stock head unit with a BOSS BE7ACP-FT and designed this panel to cleanly integrate the USB ports…
A 2-piece mounting bracket to secure a dashcam's external battery under the driver's seat of the E210/2019+ Corolla. Ideally, for those without the JBL Premium Audio package Only using Velcro to mount a dashcam battery to the vehicle's…
Knob, heater regulator for Toyota Corolla 110 (may be suitable for others corolla too) Toyota 55905-02070-B0 and 55905-02070-B1 Only for console as pictured: V1 - custom KNOB V2 - like original
This was my first attempt to raise the cargo deck. It works but is a bit wobbly because the cargo deck bottom no longer touches the interior body trim. I have included the parametric freecad file if you would like to modify it for your…
This is a 1/48 scale print-in-place high quality model of an AE86 Toyota Corolla, commonly known from the anime Initial D The wheels and axles are separate from the rest of the car, allowing it to print in one piece and let the wheels…
Here is a 3d printable bearing shield for the 8thgen Corolla top hats. I made this as the old bearing shield disintegrated and needed a quick fix while waiting for a new bearing to come in. This is the part that is on the bottom side of…
Low space for storage near the driver seat, hard to reach and poor quality Qi charger (especially when phone has a lens that protrudes highly) and no refrigerated storage compartment available inside vehicle gave me an idea for design. I…
A little box shaped as the motor plastic cover of the Toyota Corolla Zre152R and other models/ If you enjoy this project, please consider following me and joining my supporter tier to help keep my free models coming! Be sure to explore…
Modified original to only 1 cup holder, plus small trinket tray.
Original case broke. The dealer wanted something like 30 bucks for a replacement. So here it is. When I searched I didn't found any, that would fit my internals of the remote, so had to model a new one. For multi material import together…
The hinge on my 2010 Toyota Corolla broke, so I modelled a replacement and printed it. Its been working for close to a year now with no complaints. I printed with Super Pla+ in the Stl's current orientation with supports turned on.
On UK Corolla's we had a blanking plate where a clock is normally placed in other markets. The clock is normally integrated into the audio head unit, however when you remove that and fit your own aftermarket head unit, you lose the clock.…
Son dos soportes para colocar a ambos lados en el maletero muy útil para colgar bolsas para que no se caigan. + Impresora Anycubic Kobra Neo + rigidez 15% + paredes x3 + acabado 0,4 mm + girar 180º para una mejor impresion + sin soporte +…
Client of mine was installing Morel Virtus 603 speakers on his GR Corolla, but the CDM-600 midrange was pretty large, the generic adapter was too small for it. So I designed and printed my own. Printed with 100% infill and 3 perimeters in…
[IMPORTANT] In OrcaSlicer i got best results by enabling Others→Slicing Mode→Close Holes Im making this model available for 3D printing. Not tried to print yet bc lack of fillament, i would apreciate any suggestions to get better results.…
Raise the cargo floor of your Toyota Corolla Cross Hybrid (CCH) AWD to be level the folded rear seats with this cargo riser that compliments the spare tire upgrade . Print in PETG or another non brittle, high temp material using the…
My friend has a 2012 Toyota Corolla, and his Keyfob exploded. He reached out, and a short time later, I found a model on Thingiverse. I printed it but disliked how we couldn't find actual hardware or how some of the tolerances weren't the…
Edit your self if you have Ideas It was made in fusion 360 You can sell the 3d Print Not the file, Thank you
2 parts- main cover and flexxible ring Headlight Cover can be printed from PLA or PETG with supports Rubber ring printed from FLEX i printed it with 3 walls , 2 upper, 2 lower layers and zero infill for maximum flexibility.
Extension for rather small hooks in the trunk of Toyota Corolla TS XII (E210). - version 02 (better fit, more robust). Printing from PETG (or something more durable) recomended. Inspired by https://www.thingiverse.com/thing:5444285
The cup holders in the 2024 Corolla Cross do not fit the wide-bottom (91mm) Hydro Flask. This is an adapter that fits in the cup holder. Note that some models of Corolla Cross (2022, for example) have a different style of cup holder.…
My Dopper water bottle was too loose, which can be dangerous. This stabiliser makes sure it doesn't flop around in the center console.
Adapter to mount Aliexpress arm rest. There are a few versions of the arm rest on aliexpress but this one has the holes more on the outside. Need your own push pins and might need to 3D print some 1mm washers around the pus
This is a simple coin tray/box for a 2009 Toyota Corolla (or a similar model/year). It is designed to fit in the little compartment next the the cigarette port, while you can still close that compartment door/flap. I've designed it back…
This dash organizer fits a 2024 Toyota Corolla behind the screen in the dash. I printed mine with these settings: Layer height: .3mm Infill: 10% Supports: None You'll likely need a heat resistant plastic if the inside of your car gets…
3D-Printed Replacement Windshield Washer Fluid Cap for 1993-2002 Toyota Corolla & Geo/Chevrolet Prizm Keep your vehicle’s washer fluid system secure with this 3D-printed replacement windshield washer fluid cap , designed to fit all…
My mother needed a cupholder adapter to fit her 32oz bass pro water bottle. I quickly whipped this up. will probably fit other car style cup holders that can holder a standard 12oz can. designed specifically to holder a 32oz bass pro…
Ever been driving in the heat and wanting the cool air coming out for the non existent passenger to actually reach you. Well this adapter should help direct cool air towards your midriff. Print with PETG or PLA depending on your needs…
Portachiavi ispirato alla Toyota Corolla Hatchback (serie E210). Modello 3D estruso da silhouette laterale, minimal e riconoscibile, perfetto da stampare in PLA o PETG. Include: File STL pronto per la stampa Sagoma laterale fedele al…
Corollas of certain years (2014-2016 in particular but probably others as well) are notorious for failing front speakers due to water ingress at the lower front door speaker connector and subsequent corrosion of the speaker wires. There…
Hey, I quickly designed a small exposed handle for the trunk floor on E210 Corolla Hatchbacks. This also might fit GR corolla hatchbacks as well but I haven't found one to try it on. I used PLA + for the print and its in the correct…
Want to show appreciation? Consider checking out my Ko-fi The dash cubbies were broken in my 2005 Toyota Corolla, so instead of spending the money on a new center console, I simply sketched up a cover that can hold a MagSafe phone charger…
A simple organizer to store gift/punch cards, pocket tissues, a 12V charger, 30mm diameter containers, and misc. larger items in the E210/2019+ Corolla center storage compartment. The containers I used were from Thingiverse . You will…
A hanging organizer tray to store glasses, short USB-A/USB-C dongles, a pen and larger items for the E210/2019+ Corolla center storage compartment. The maximum length of a USB dongle that will fit is 32mm (not including the male end…
A MagSafe/Qi2 mount that replaces the OEM rubber wireless charger pad in the E210/2019+ Corolla with the Premium Package ( 861C0-12011 ). Not designed for the standard package with the storage bin ( 58839-12090-C0 ). From my testing, the…
A storage tray that press-fits onto the wireless charger pad in the E210/2019+ Corolla with the Premium Package ( 861C0-12011 ). Not designed for the standard package with the storage bin ( 58839-12090-C0 ). Two Variations: Standard tray…
I found myself irritated at how bright the indicator lights for PRNDL could be at night, so here is a quick solution. Print at 0.12mm layer height and bend 90 degrees at thicker section (top layer side upwards). Black filament was too…
XXXC Corolla badge for TE72 and KE70 corolla sedans with quad headlight grilles. Uses M6x1.0 bolt.
This is a lovely printable representation of one of my most favorite cars, the Corolla Touring from Japan, with absolutely amazing detail, and a lovely design, this model is a great way to represent the car.
Concepto del diseño El Toyota Corolla 2007 es un modelo icónico y práctico pensado para entusiastas de los coches y coleccionistas en miniatura. Este modelo 3D refleja la atención al detalle y la calidad conocidos de la marca Toyota. Uso…
Concepto del diseño El Toyota Corolla 2010 es un modelo icónico y práctico pensado para entusiastas de los coches y coleccionistas en miniatura. Este modelo 3D refleja la atención al detalle y la calidad conocidos de la marca Toyota. Uso…
Designed for passenger side based on stock version. Slight changes from stock to optimize for printing. printed in ASA, works great!
Printed in Elegoo Centauri Carbon with black Elegoo TPU. Both right and left files provided. Made from the original product. Settings: Layer height- 0.2mm Speed- 20mm/s No supports No retraction License: Toyota Corolla Door Rubber…
Diseñé este pequeño accesorio para aprovechar el espacio del sujeta vasos doble del Toyota Corolla , ya que el coche no incluye ningún cenicero ni compartimento cerrado para monedas o pequeños objetos. El modelo encaja perfectamente en…
My SO's 2015 Toyota Corolla didn't have any indicators for the trunk and gas levers so I created these quick slide on indicators for them. Printed with Hatchbox Green PLA at 0.2mm layer height, probably should have used PETG instead due…
TEQ strut tower cap for Ke70 corolla. uses original rubber cap inside model with 3x m2 grub screws to hold it in place.
Shifter bezel for Ke70 corolla to cover shift boot plate and bolts when not running a factory center console
Nenasel jsem jiny misto v motorovym prostoru tohohle auta, kde: Plasicka bude dobre pristupna (je nutne cas od casu menit baterii v ni) Bude mirit, v ramci moznosti, do motoroveho prostoru Nebude tam nikde prekazet. Je potreba: 4x tavna…
Modeled this up for a co-worker for his 96 corolla. All the mounts et al broke off from being brittle with age. Might work on year models 93-97, this is without tilt-wheel.
Insert piece for a Toyota Corolla to be placed in the add-in space on the dashboard. Clips in place for custom addons. Best orientation for strong print displayed in the slicer photo. This orientation, while annoying from a cleanup…
When replacing the front wheel fender liner on my 2006 Toyota Corolla, I encountered that the front mud flap, which is attached to the linter by two M6 bolts, needs a backer plate on the inside of the liner. The original backer plate was…
Toyota GR Corolla Wall Art; can be scaled easily and can be hung or stand alone. I also take requests
Printed and Tested on 2011 Toyota Corolla. Most likely fits many different Toyota Models, but not verified.
Printed and Tested on 2011 Toyota Corolla. Requires disassembly of JBL Remote and mounting into switch plate. Marked Body can be imported into slicer with marks or not. Marks are separate STL to enable easy multi material panting. Model…
A 2-piece mounting bracket to secure a dashcam's external battery under the driver's seat of the E210/2019+ Corolla. Ideally, for those without the JBL Premium Audio package Only using Velcro to mount a dashcam battery to the vehicle's…
Rear seat folding button for Toyota Corolla 8 (ae11* and e11*) P/N 72661-05010-B2 and 72661-05010-B0 External dimensions - 22mm x 21mm, diameter of the inner hole - 5mm I was printing on an Anycubic cobra 2 pro. Layer height is 0.2mm.…
Knob, heater regulator for Toyota Corolla 110 (may be suitable for others corolla too) Toyota 55905-02070-B0 and 55905-02070-B1 Only for console as pictured: V1 - custom KNOB V2 - like original
This was my first attempt to raise the cargo deck. It works but is a bit wobbly because the cargo deck bottom no longer touches the interior body trim. I have included the parametric freecad file if you would like to modify it for your…
Replacement A/C Vent Louvre Tab for a 2011 Toyota Corolla. Installs in place. Printed in PETG, with tabs down and organic tree supports.
Cup holder insert with slot for resting your Carkey. Tested on Toyota Corolla 2021.
Воронка для воды в бачек омывателя с круглой горловиной. Для спонсоров карта OZON 2204 3201 2575 1794
Telefonun vites kolunun tam önünde ve uygun açıda olması kullanmayı kolaylaştırıyor. ancak araç kullanırken telefonla ilgilenilmesi ciddi kaza riski oluşturur. aracı durduktan sonra rahatça istediğinizi tek elle yapabilirsiniz.
Made this to fix my Toyota Corollas telescoping steering wheel since the OEM part broke. Use 3 M3x10 bolts. Print in a vertical orientation.
Replacement bushings I designed inspired by some replacement ones I bought for my car. They came out to be about $10 for a set for 2 doors. I thought some people may want to save some money and print it themselves. These are the…
Full disclaimer: you will need to cut up your glove box a little bit to accomodate the larger dingus, and to drill/screw into it. Just one screw though (typical black drywall screw fits perfect). I designed this thing because I broke the…
A blank grille emblem, made to fit a 2004 Toyota Corolla. It may fit similar models like 2002. There are optional zip tie holes for retention. It's WEAK! Print in a ductile material like PLA+ or PETG or ABS (plain PLA will break…
This is a replacement rear seat fold-down handle for an E120 (~2002-2007 depending on where you live) Toyota Corolla hatchback. It's the small handle you use to release the rear seats so they can fold down and expand the boot/trunk size.…
Cup holder for mid 2000s Toyota Corolla (E120), My friends car didn't come with cup holders, so designed this to fit in the centre console, it has a weird cubby with lid next to the handbrake where you would think they would put cup…
My girlfriend broke a cap, which was holding seat lifting lever in place. To this day I wonder how she managed to do that. When I finally got my 3D printer, I decided to make this part, to stop losing this lever every time I used it.…
Corolla E12 (or might fit some other Toyotas) clip, which in my case replaced coin holder which was useless for me. Category: Automotive
This 3d model was designed at 230mm, however my bed was too small for this print and i have now added slots for other personal belongings. the model is split in half for easier print. Slight modifications made to this wonderful insert (…
Piece of plastic to lift your cup. The thickness of the original part is 20mm but it is not enough because the cup drops so low. many people asked me to redesign the part and increase its thickness to 40mm. The bottom Diameter is 68 mm…
2020 Toyota Corolla 1L Water Bottle Holder. For use with a 1L Camelbak Bottle. Print instructions Category: Food & Drink Summary 2020 Toyota Corolla 1L Water Bottle Holder. For use with a 1L Camelbak Bottle.
Made a storage separator for my corolla to make room for glasses, coins, hand sanitizer and mints. Has extra room for cards and pens (pointing up) and general room. Probably works for 2018-2023 Toyota Corolla Hatchbacks or 2019-2023…
Fits 1998-2001 Corolla (8th Gen) Washer Fluid bottle. Has tabs on each side to make pulling off easier. I printed this in ABS and used acetone to "glue" the symbol on.
print at high z-resolution. petg recommended due heating inside car during summer time Be sure to insert female part into hatch cover FIRST, then only insert the pin to lock it. You may not be able to remove it once installed....but, hey,…
Note: I do not own a GRC, made this for a friend that owns a GRC. They confirmed the fit to work in their shifter set up.
Toyota Lexus Screw Cover for Yaris, Auris, Corolla, Rav4 and other models I recommend black material, printed in 100% infill and support only under the long pin.
replaced headunit in my 2014 corolla that came with 2 additional usb ports. Designed this to hold them in place
Hello I was on the need because the original broke.
this is a 3D print replacement for 79-83 TOYOTA Hilux (RN30, LN40) and Corolla (E70, KE70, TE71, TE72) grill lock clip on these old Japanese cars, this item often overlooked, it's commonly gone or broke and just replaced by zip-ties or…
Air Went Blade Replacement Part I have a 2005 Toyota Corolla in which the previous owner used to attach his phone onto the AC air went blades and sucessfully broke two of them. I didn't find the blades selling anywhere and replacing the…
Not designed for comfort, however i find it plenty comfortable. Did not fit on my MK4 print bed i had to cut and add connectors. I was able to cut it in the back to make all mount points fasten to a contiguous piece for best stability.…
