1 / 2
Trunk & Gas Lever Indicators for 2015 Toyota Corolla
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Slide on trunk and gas indicators for 2015 Toyota Corolla levers.
- Ocena
- 5 / 5
- Polubienia
- 21
- Pobrania
- 102
- Wydruki
- 1
- Wyświetlenia
- 1243
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (16)Powiązane
My SO's 2015 Toyota Corolla didn't have any indicators for the trunk and gas levers so I created these quick slide on indicators for them. Printed with Hatchbox Green PLA at 0.2mm layer height, probably should have used PETG instead due to the heat and UV exposure, but green was requested and I only had that in PLA. I printed the trunk one without supports and only had very minor layer sag. I did use supports on the gas indicator. Both prints print in under 30 minutes.