Glove Box pin repair Toyota Corolla Matrix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Full disclaimer: you will need to cut up your glove box a little bit to accomodate the larger dingus, and to…
- Ocena
- 0 / 5
- Polubienia
- 29
- Pobrania
- 76
- Wydruki
- 0
- Wyświetlenia
- 844
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
Full disclaimer: you will need to cut up your glove box a little bit to accomodate the larger dingus, and to drill/screw into it. Just one screw though (typical black drywall screw fits perfect).
I designed this thing because I broke the slo-open pin of a glovebox in a 2013 Toyota Matrix.
Should be the same for many other model of Toyotas.
This is not a critical part, so 10-20% infill is fine. No supports needed if you orient the pointy end upwards.
I printed in PLA but sturdier materials might be better
Print Settings
Printer:
BIQU B1
Rafts:
No
Supports:
No
Resolution:
0.16
Infill:
15
Filament:
Amazon Generic PLA
Black
Category: Automotive