Liczymy pasujące modele…
Looking for a place to store your glove or other items when not racing? This is a ventilated box designed to mount into aluminum profiling. Only 1 set of holes needed, but there are 2 sets, each 40mm away from each other height wise.…
here is the elusive glovebox covering plate for the Mazda 2 DE 2007 to 2014. this plate just sits on top of the magazine opening to provide privacy for your items inside the glovebox. its easily lifted out of the way so you can access all…
This part is designed to repair your glovebox button if the button wants to fly off. There is a small retaining tab that breaks. This part slides in from the side. It is a friction fit. No glue necessary. I repaired the bottom button, but…
Bracket/hinge for glovebox on old chevy truck. Should work for 1988-1993 I believe. This bracket is towards the center of the truck, the outer part seems more robust. Recommend printing in PETG or stronger.
I wanted to hang grocery bags in the front of my truck for the ride home from the grocery store. This works great for my 2015 Nissan Titan. I believe that it will fit 2010-2015 .
A hook to hang over the glovebox in order to hang a small amount of groceries. It fits my 2010 Mustang but certainly other years too.
Fiat part : 182063280 Compatible with : Fiat Uno, Fiat Fiorino, Fiat Premio, Fiat Elba, Fiat Duna Important : Print horizontally, as per the stl file for better strength.
I didn't want to buy a $25 glove box shelf, so I printed @melmel's divider and modified @Ashyr_166850's drawer files to fit. For the 2024 Toyota Tacoma. If you want a more snug fit, increase only the height to a max of 65mm. The shelf is…
I suggest printing standing up, for the layers to to copy the path of glovebox rotation. I recommend printing at the best quality you can manage - I attach a 0.25 / 0.07mm slice. My car shop (authorized Ford) had trouble to order this one…
The glovebox handle for a 1972 SAAB Sonett. May match the glovebox handle on other model years. Due to tight tolerances, shorter screws (3/8 in. long) than standard are highly recommended. Do not use a brittle material, as the threads…
Replaces the flat nut on the back of the glovebox mounting setup. Uses a single M4 nut per bracket. 3 are required to fully reinforce the glovebox. I used ABS+ for my brackets, and I would recommend it. Supports optional, print on either…
Glovebox face with logo to replace the old worn out and usually cracked plastic. Should fit snugly enough to snap over the aluminum glovebox door and secure with the existing door pull
I recently bought a Motorola MA1 wireless Android Auto adapter for my car. However, in my Audi Q3 F3 , the USB ports are located in a visible spot on the center console, which I found inconvenient. To solve this, I decided to install an…
A lock/wedge to keep the slider in place, so it doesn't pop out of its socket. If you have this problem, the sliding arm has probably retracted and is hiding. Possibly you can't close the box at all, since the un-slotted arm is jamming…
Eine Wandhalterung für Gummi/Latexhandschuhboxen mit Pfodenabdruck. Bei beiden Modellen ist der Pfodenabdruck (und dem Modell mit Füllung noch zusätzlich die großen Öffnugen) mit einer 0,4mm dicken Wand geschlossen um den druck zu…
This is a replacement latch for the glove box (or shin bin) of a Rover P6 (3500, 2200 or 2000). Printed in PETG, with 50% infill, and extra walls. Print on its flat side, with organic supports to the build plate only. Designed by Margaret…
This is a knob that slides over your glovebox key to hide the key and create a better looking knob that can be left in place. I printed mine in PETG. I pushed my key into it right after it was printed. It was a tight fit for the key. I…
Hi! I made a phone mount for my 2000 Subaru Forester, its made to fit Redmi note 11 pro with a port for charging. I don't know if it fits any other phones as good ;). Its inteference fit but some glue should be used. The mount is held…
Looking for a place to store your glove or other items when not racing? This is a ventilated box designed to mount into aluminum profiling. Only 1 set of holes needed, but there are 2 sets, each 40mm away from each other height wise.…
This is a draft. Being printed. Known Idssues: Conflict in design - Elements need small negative printing blocks to fit later. Next: Various elements as stl Modular File
here is the elusive glovebox covering plate for the Mazda 2 DE 2007 to 2014. this plate just sits on top of the magazine opening to provide privacy for your items inside the glovebox. its easily lifted out of the way so you can access all…
This part is designed to repair your glovebox button if the button wants to fly off. There is a small retaining tab that breaks. This part slides in from the side. It is a friction fit. No glue necessary. I repaired the bottom button, but…
Modeled without the reinforcing ribs, but with walls 50% thicker than the original—so it should be stable enough.
Replacement BMW Z3 glovebox latch strike plate, an exact copy of the factory part.
Das ist eine Schublade für das kleine Ablagefach im Handschuhfach vom Seat Ateca This is a drawer for the small storage compartment in the glove box of the Seat Ateca, i'm not sure if it also fits in the glovebox of a right-hand-driven…
print sideways so the layers are solid on the hinge sizing may need to be tweaked Category: Automotive
Print center section and desired two dividers to compartmentalize your glove box *Large section needs large printer. Print this part with supports and brim to prevent warping. Tested on Model 3
Quick pop in replacement part for the Holden Crewman glovebox endstop. The rubber original ones were just destroyed. Print on side with supports touching buildplate for optimal strength. Print Settings Printer Brand: Monoprice Printer:…
I wanted a way to hold a box of nitrile gloves to the pegboard in the shop.
The new gloves I got come in a bigger box, so I needed to make my previous hanger adjustable. This should fit boxes up to 80mm deep. There are holes for M5 setscrews to set the size.
Glovebox hinge for a 2001 Mitsubishi Galant. It may fit other Mitsubishi models. Print with hook side face down, 100% infill and support on for best results. Holes may need to have a drill run through them for the best fit. Print Settings…
Part has been tested on an 87 Hardbody and appears to work well. Built with OpenSCAD, file included if you need to make any adjustments. Print Settings: Supports: Touching Buildplate Infill: 100%
Printed on a modded MK3S+ with clear PETG 0,2 layer and custom settings
Note its a bit too tall to be printed on a Prusa MK3! I printed this one on CR10 Max with PETG Note it will fit the normal Nitril gloves box with 100 in like Semperguard and more in the same style box. Enjoy !
I made this drawer to keep small things like keys, parking change etc in my Audi glovebox. My car is an Audi A6 C7 2012 UK model. There is a small recess underneath to make a small handle to pull it forward. It took many iterations and a…
My glovebox shattered. This assembly replaces it with a printable version that provides a tiny bit more room and would be easy to print since it is “boxy” and not curved like the factory glovebox. Note that only one wedge is shown; you…
If you are unsure about the dimensions of your frame storage flap and/or the bottle mount, see the spec sheet below for the exact dimensions of the handle. Originally designed for the Santa Cruz Megatower V2, but will probably also fit…
I wanted my modded Mini to be as clean as possible but with a possibility to store some frequently needed tools (like hex keys, nozzle wrench and spare nozzles) with it. So I came up with the idea of a glovebox style stowage device…
My Seat Ateca (66 plate) has this little cubby hole in the glove box that I thought was kind of useless without a lip because stuff could fall out of it, so I printed one. This little cubby hole might be present in other Seat models but…
A quick and easy Costco Nitrile Glovebox Holder. Printed in PLA .25mm Layer height.
This is the endstop for the glovebox compartment in the pajero mk2, this is for the 98 version, not sure if the others are the same. I print on the side with supports to get the most resistance. Then you basically just slide it in the…
A replacement hinge for the glovebox for a Mitsubishi 3000GT! It's not a perfect replica, but its pretty darn similar, and yes it works just as good as a factory one. I recommend printing it on its side so that way the actual hinge has…
I retrofitted a glovebox cooler to my Audi. The glovebox outlet and pipe were easy to obtain, but there wasn't any way to connect the pipe to the air con box, so I made one. This flange slots onto the end of the pipe, then you will need…
This is the hook for the trap door latch on the storage compartment between the driver and passenger seats on the back "wall" of the convertible (roadster) model of the Audi TT MK1. There is just no good name for this compartment… it has…
The left and center glovebox support points broke off on my 02 Dodge Ram 2500 truck, this model adds those back to keep the glovebox in place. Printed at 100% infill for best strength. The left hinge still had part of the original mount…
The ~26 year old ABS part MB424629 snapped, so i measured up the framents and came out with this. I printed mine on my i3 MK3S+ out of Prusament PETG with a 0.4 mm Nozzle and 0.1 mm layers i think, but i by no means optimised this. you…
This fits in the glovebox of a 992 (GT3). You will need to punch a hole in the glovebox as per the picture to run the cables through. This has been verified with the Racelogic HD2 version 1. I printed in PLA for my car, but it would…
I bought few different glovebox hooks for my Tesla Model Y 2023 but they all turned out didn't work for my car. So I just had to make this one myself.
This is an adjustable glovebox organizer for 2015–2022 Chevrolet Colorado and GMC Canyon trucks. You will need to print: 1 Top; The Full model (355mm x 194mm) is only if you'd like to cut it a different way than the pieces provided. The…
The tray is 99 x 145 x 38 mm in dimension. 2 trays can be placed on the same shelf.
Did the hook or clip break on the grocery hanger for your XC40? Just want one that holds more weight or different color? The retaining nubbin may or may not last but doesn't seem necessary anyway. Print laying on side. Wall loops and fill…
The tray is 90 x 208 x 38 mm in dimension. 3 trays can be placed on the same shelf.
A glove box tray for the 2012 Fiat 500 POP. Print in PETG to survive the car heat.
