02 Dodge Ram 2500 Glovebox Hinge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
2/3 of the hinge points for my 02 Dodge Ram 2500 truck's glovebox broke off, this bolts up to the original mount points
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 590
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
The left and center glovebox support points broke off on my 02 Dodge Ram 2500 truck, this model adds those back to keep the glovebox in place. Printed at 100% infill for best strength. The left hinge still had part of the original mount so this has a hole to account for that.
The hinge point is slightly lower than the production location, but that gives slightly more space available to get the glovebox installed and still lines up well and doesn't rattle when closed.
Re-uses 2 of the screws which hold the original plastic piece. I had to clear out part of the original mount that was left for one of them with a dremmel to give enough space for this bracket