E210/2019+ Corolla Wireless Charger Storage Tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A storage tray that press-fits onto the wireless charger pad for the E210 Corolla
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 848
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
A storage tray that press-fits onto the wireless charger pad in the E210/2019+ Corolla with the Premium Package (861C0-12011).
Not designed for the standard package with the storage bin (58839-12090-C0).
Two Variations:
- Standard tray
- Tray with mounting holes for a Noctua NF-A4x10 5V fan
For a clean, almost cable-free looking interior, I routed the charging cable behind the wireless charging pad, through the center console, where it can be zip-tied to the OEM wiring harness and plugged into the 12V charger in the center storage compartment. You can either drill a hole in the center storage compartment for an entirely hidden cable look or route it down the bottom side of the center console, then up into the storage compartment, as shown in the pictures.
You will need a USB extension cable to reach the center storage compartment since the USB adapter that comes with the fan is too short. I used a 6ft cable since I already had an extra available to me, but you might be able to get away with a 3ft cable.
This model was designed to work with my MagSafe/Qi2 Mount.
Material: ASA/ABS/PETG
Resolution: 0.2mm
Walls: 4
Infill 40%
Supports: No
Printing and Assembly:
Print the support connectors on the flat sides and press fit them into the base and tray. Use super glue if needed, but there should be enough friction to avoid the need for it.