1 / 5
Pro4 SC10 2S-3S LiPo battery spacer — image 1
1 / 5

Pro4 SC10 2S-3S LiPo battery spacer

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Preliminary estimate for PETG

€1.63 – €1.99 net (excluding VAT)

For file: SC10 2S-3S battery spacer v1_0.2mm_PETG_MK3S_2h8m.gcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €1.81 excluding VAT (range midpoint).

Weight reported by the author
17 g
Print time reported by the author
2.13 hr
Source material
PET
Estimate material
PETG
Estimate printer
Bambu Lab P1S - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

This spacer piece allows use of velcro battery straps sized for 3S LiPo, but with smaller 2S batteries.

Rating
0 / 5
Likes
3
Downloads
20
Makes
0
Views
207
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

This piece acts as a spacer to sit on top of a 2S LiPo battery to make it the same thickness as a 3S battery, such that you can use the same length straps with both battery sizes. The spacer has built-in ‘shoulders’ that are spaced apart by the same dimension as the Team Associated Pro4 SC10 chassis strap locations. I also used some double-sided tape to stick the spacer to the battery for convenience, so it always stays with the battery.

I found this 20mm X 250mm velcro battery strap to be the perfect length. There is even a recessed area where you can place down some extra velcro and help hold the battery balance lead securely in place:

I used Hatchbox black PETG and printed it directly on the build platform. Enjoy!

Tags