Pro4 SC10 2S-3S LiPo battery spacer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This spacer piece allows use of velcro battery straps sized for 3S LiPo, but with smaller 2S batteries.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 207
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This piece acts as a spacer to sit on top of a 2S LiPo battery to make it the same thickness as a 3S battery, such that you can use the same length straps with both battery sizes. The spacer has built-in ‘shoulders’ that are spaced apart by the same dimension as the Team Associated Pro4 SC10 chassis strap locations. I also used some double-sided tape to stick the spacer to the battery for convenience, so it always stays with the battery.
I found this 20mm X 250mm velcro battery strap to be the perfect length. There is even a recessed area where you can place down some extra velcro and help hold the battery balance lead securely in place:
I used Hatchbox black PETG and printed it directly on the build platform. Enjoy!