Rubber Duck Fridge Magnets
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a scaled down version of the Rubber Duck made by Wille on Thiniverse.
- Rating
- 4.727 / 5
- Likes
- 189
- Downloads
- 972
- Makes
- 14
- Views
- 3,892
- Reviews
- 11
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
This is a scaled down version of the Rubber Duck made by Wille on Thiniverse.
I have added a flat bottom and a hole for a 10*3mm magnet
It is recommeded to glue the magnet with some CA glue into the hole.
If your prints have an elephant foot inside the inner hole, take a sharp knive end remove the burr - then the magnet is press-fit
Print instructions
Unassociated tags: rubber duck
Category: Kitchen & Dining Print Settings
Rafts: Doesn't Matter
Supports: No
Resolution: 0,15 or better
Infill: 10% recommended
Notes:
Print in PLA, ABS, PETG or any other material. No infill needed, if the shell is at least 3 layers thick, otherwise us 10% infill.