Simon's Cat Fridge Magnets
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simon's cat inspired magnets
- Rating
- 4.9 / 5
- Likes
- 703
- Downloads
- 1,619
- Makes
- 24
- Views
- 6,242
- Reviews
- 20
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Fun little Simon's cat fridge magnets.
Default size vary from 80 to 100mm in heigh and 5mm in thickness.
You may want to change color after the 3mm layer.
Glue a magnet on the back (CA or neoprene glue). I used a single 10x2mm per item, I don't recommend smaller magnets as they may be to weak (or use multiple of them). Also pay attention to the center of gravity of each models.
STLs don't come with a magnet insert, that way you can use a different size than me.
I've provided an orca's profile that you can reuse to costumize for your magnet size. Edit the dimensions of the “magnet_insert” objects to your needs. By default, the insert dimensions are 10.5x1mm.