Counting matching models…
Adapter to mount an 50mm Quickrelease on an Fanatec Wheel The Height of 25mm fits on a Simagic QR50. Other Quickreleases should fit, but cant confirm, i made additional Spacers to change the Distance between QR and Wheel. I added an 6.5mm…
Why not make a camera strap. Take a 1" wide piece of 2.5mm thick webbing/biothane, sew on the holder and then use some cordless 550 paracord in the puck, to give yourself, a Peak Design inspired quick release system. Rather than a spring…
Small hook for a 3mm Rubber band to fast tentionan and quick release. one-hand use possible.
Small hook for a 3mm Rubber band to fast tentionan and quick release. one-hand use possible.
These beads are designed for quick release buckles on water sports equipment such as a harness on a buoyancy aid or a dump valve on a BCD for SCUBA. You can adjust the beads buoyancy and add reinforcement by adding a 25mm m6 or m8 penny…
Thrustmaster T-series (TX, T300) replacement hub to mount steeringwheels with 70mm bolt pattern or the NRG quickrelase that will also fit Moza steering wheels. I made a contact plate that corresponce with Moza wheels, the way i wired it,…
Simple Spacer for the NRG Style QR70 used at Simagic, Moza or VRS. Additional i added a cable clamp for an coiled cable Simply add the Spacer between the QR and your Wheel, to compensate for different heights of different steering wheels,…
Adapter to mount an 50mm Quickrelease on an Fanatec Wheel The Height of 25mm fits on a Simagic QR50. Other Quickreleases should fit, but cant confirm, i made additional Spacers to change the Distance between QR and Wheel. I added an 6.5mm…
Simple Spacer for all Conspit Wheels to get more Distance to your Wheelbase and adjust the Height compared to other Wheels. Longer Bolts needed, depending on the Spacer you want to use. I have also made Spacer for 50 & 70mm Hole pattern.
Simple lip to help with QR removal. Idea from the 50mm QR or QR-A.
Simple lip to help with QR removal. Idea from the 50mm QR or QR-A.
I was in need of a dedicated quickrelease plate for my gopro. can be printed without supports, altough the underside might look a bit rough. to finnish the model, just add a m5 nut. works with the origanal gopro fasteners
A combination of two Thing-O-Matic upgrade things: Y-Axis Idler Support Bracket for Thing-O-Matic The rod cover from Cupcake XY Stage Quick Release Kit Category: 3D Printer Parts
Hallo! Update 08.10.2017 Ich habe eine Version mit 10 Grad Neigung nach unten erstellt. Dazu muss man aber den Rumpf des Opterra bearbeiten. Das ist ein Schnellverschlusssystem für die Gopro Hero 5 Session passend für den Eflite Opterra.…
Hallo! Für den schnellen Akkutausch wollte ich nicht immer die zwei Schrauben der original Abdeckung öffnen. Des halb habe ich einen Quickrelease zum Wechseln des Akkus entworfen. Ich habe die Teile aus PLA mit einer 0.5mm Nozle gedruckt.…
so here is the gopro quickrelease xbox battery cover it can be easily removed from controller. i also use magsafe to thread adapter because its loookss way more cleamer than other phone holders. I played some diameters of the qr buckle so…
Spare Part that fixates the sliding plate. Still needs the Screw and 2 small springs that came with it, though you can use the spring of a ball pen as replacement aswell. Printed with PLA and 20% Infill.
This adapter enables mounting of monitor with [HP QuickRelease Bracket 2] with 40x40mm holes to [VESA 75mm x 75mm] stand. Info about HP QuickRelease Bracket: https://www8.hp.com/h20195/v2/GetPDF.aspx/c06264645.pdf PS. picture shows 5mm…
All of you know this situation: you printed your favorite 3D benchy and want to take a cool picture. You have your cam handy but &$§@**!!!! Why do I need to unscrew all the quick release plates? After roughly one or two hours of screwing,…
A PCB that lets you use aftermarket quick releases to provide power to your diy wheel. You will need the spring pins and the JST connector, they can be found on aliexpress, search terms: “JST XH 2 Pin 90 Degree SMD” (2.54 mm Pitch)…
To get my cad files click here I recommend PETG for more stability
A lot of currently available headlamps share the same type of mounting on the headstraps. The mount consists of a couple rubbery rings that have to slip over the body of the lamp. This is ok for a one time task, but if you want to use the…
This is an alternative Quick Release for the MK4's xLCD in combination with the Original Prusa Enclosure. It is a remix of an idea originally posted in the form by the user @ssmith . When installing an MK4 printer in an Original Prusa…
We got a tripod for the thrift store and it was missing the quick release camera mount. I made this to use with a ½" long ¼-20 bolt to attach a Ram Mount ball. It works perfectly. Printed with PETG and no supports.
This print exists out of 3 models, The base, lever and pin. Orientate the 3 parts like this Print the parts with no supports and with a brim To assemble the model first put the lever on the main body by pushing it on the shaft. Then push…
Works with both wheel and base side, atteched via two M3x6 countersink screws that came with original part,
![Adapter [HP QuickRelease Bracket 2 40x40mm] to [VESA 75x75mm]](https://media.printables.com/media/prints/210318/images/1930032_cc5bd0a5-40bd-4247-ab45-812571ac68fb/cc89ee0c-98ff-4fe6-923f-175ba4913fe8.jpeg)
