1 / 4
Heart Stamp Jig for Toilet Paper Rolls — image 1
1 / 4

Heart Stamp Jig for Toilet Paper Rolls

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Heart-shaped jigs to keep toilet paper rolls in form to stamp with them on paper

Rating
0 / 5
Likes
8
Downloads
16
Makes
0
Views
108
Reviews
0

Updated at source:

Model information

Category
Other Ideas
License
Creative Commons — Attribution — Noncommercial — Share Alike

While looking for a nice craft idea for Mother's Day, we came across the common method of stamping hearts with toilet paper rolls. We really liked the idea because, unlike bought or 3D-printed stamps, all the stamped hearts look a little different and have a unique touch. As our little ones found it difficult to hold the rolls in such a way that the hearts would come out nicely, I designed these jigs in which the toilet rolls would fit exactly and keep them in shape.

The jigs are for standard toilet rolls (or kitchen paper rolls) with a diameter of 40mm. Printed in 0,2mm PLA in Structural Preset. We used thick finger paint to print the stamps, but I guess watercolor or acrylic paint works also fine.

I recommend cutting about 30-40mm off a roll, flattening it (to get the folds for the corners) and then inserting it into the jig:

If the corners won't go in, it's a good idea to cut them:

It is also important that the cardboard lies evenly and flatly on the paper. If there is too much of a gap, I recommend correcting this slightly with scissors:

Before stamping for the first time, the roll should also be allowed to lie in the paint for a while so that it can soak it up and swell a little. The heart shaped stamps will then become thick, strong and unique.

Tags