Counting matching models…
Vánoční přání ze kterého si každý obdarovaný může sestavit svou Sněhovou vločku. Tiskl jsem z PLA Prusament galaxi silver https://www.prusa3d.com/cs/produkt/prusament-pla-galaxy-silver-1kg/ Návod: *Vyloupejte a popřípadě ořízněte či…
Print approx. €2.54–€3.11 excl. taxPreliminary estimate for one variant
This card prints altogether in a single print. The hinge has about 0.5mm clearance and works perfectly. It can be used as a birthday card, thank you card, greeting card, etc. There is an inside pocket for a check, cash, trading card ….…
Print approx. €3.24–€3.96 excl. taxPreliminary estimate for one variant
This card is similar to others I have published, except it is plain, without an embedded message, and without a pocket within. A single, vertical print is used to print the card with the hinge. The hinge works nicely. It will likely be…
Print approx. €0.33–€0.41 excl. taxPreliminary estimate for one variant
This plane is designed and iterated to be printed without supports. It needs less 15g of filament and prints in about an hour (55m with 0,6 mm nozzle, 1h19m with 0,4 mm nozzle). This is for the whole greeting card, not the seperate parts.…
Print approx. €0.87–€1.06 excl. taxPreliminary estimate for PETGSource material: PET
In collaboration with @Nuvz we created a lightweight and thin ornament for sending in your holiday cards! Should fit a standard wallet size photo (2inx3in or 75mmX50mm), slide the corners into the slits and send away to your loved ones…
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for one variant
This opens to reveal a statement that will delight the wearer. She may likely show-off the charm to her girl friends. Or display it to some male requesting her number. The pin is retained in the bracket through a press fit. The bracket is…
Print approx. €1.25–€1.53 excl. taxPreliminary estimate for one variant
Easel With board/Chalkboard for wishes or greetings Perfect decoration for Christmas table or any other decoration I printed Easel using White PLA and blackboard in Black to use white chalk ( which I don't have at the moment of taking…
Print approx. €2.05–€2.50 excl. taxPreliminary estimate for one variant
Printing Settings 0.2mm 100% infill. This stencil will make a card in credit card size. How to make the greeting card 1. Cut out the outline and battery from one sheet of paper. 2. Cut out the slider piece from another piece of paper. 3.…
Print approx. €0.61–€0.75 excl. taxPreliminary estimate for one variant
These pieces have been scanned then modeled and should be reasonably dimensionally accurate to the originals. The original release included a rather odd 10.125" square checkerboard which I have also modeled and included as a multicolor…
Print approx. €4.16–€5.09 excl. taxPreliminary estimate for one variant
This is third greeting card showing "Spread the Light" by Yoram Ranaah depicting a menorah. The image showing the detail of the print demonstrates the accuracy of the printer. Print instructions Using all of the settings decribed in the…
Print approx. €1.29–€1.57 excl. taxPreliminary estimate for one variant
Provide a hand-written note on the right interior. It can be mailed in a thick, padded envelope. A single print provides the two sides and hinge. The hinge seems to work nicely. The cookie cutter is removed easily. Overall dimensions:…
Print approx. €7.54–€9.22 excl. taxPreliminary estimate for one variant
This card has a hinge. Place both parts of the card down on a flat surface with the hinges mating. Then put the hinge pin through the hinges. It has a press fit, so should not fall out. To mod the card for your grad, print the STLs…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
This is the second of 3 printed greeting cards aiming to develop a method of colour printing with the use of cyan, magenta, yellow and black as primary colours and a key. The description of "The symbols of Kwanzaa" explains further the…
Print approx. €0.83–€1.01 excl. taxPreliminary estimate for one variant
This is the first of 3 experimental greeting card prints. They demonstrate the conversion of any image into a 4 3d models comprising cyan, magenta, yellow and black (the key - referred to as k in print files). They also aim to test the…
Print approx. €1.26–€1.55 excl. taxPreliminary estimate for one variant
Note a version without the text is included so you can use it for any occasion for anyone. A card with a cute kitten on the front, and a framed piece of paper for your heartfelt wishes inside! I did this for my daughter's birthday. MMU or…
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant
If you want to wish a Merry Christmas in a particular way, this could be for you THE VISUAL EFFECT IS POSSIBLE EVEN WITHOUT LED OR ADDITIONAL LIGHTS AT THE REAR. as you can see from the photos even by exposing it to the sun.With LEDs, it…
Based on the model of MiniMakerspace the base was printed in back and edited with illuminated christmas greeting. The letters go throgh into the inner space so that light can come through. If you like it please do not forget to give…
Bring some extra cheer to your 3D printer this holiday season with the Santa's Sleigh Snap-Card ! This unique model combines the fun of a Christmas greeting card with the satisfaction of a 3D-printed display piece. The design prints…
Print settings 0.2 mm layer height I recommend using a textured build plate – it makes the inside of the card look awesome! Check out my other greeting cards in the Greeting card collection Demo videos 3D printed greeting card YouTube…
Christmas greeting card SNOWFLAKE KIT (Vánoční přání sněhová vločka)Bez Roku NOTyears
I needed a rack of sorts for all my little cards and doodles. So here you go. A variable function/ capacity card rack. Category: Office
Greeting/Holiday card holder for displaying family cards Print instructions no special printing instructions
About 5 years ago, I made a cute little greeting card for my husband for his birthday. I've been meaning to share ever since and have finally gotten around to it! The abilities with Prusa Slicer, the MMU, and Tinkercad make it very easy.…
Happy Halloween! Give your favourite musician a creepy Halloween card to show them how much you appreciate their Hellish music! This is a print in place Halloween card, with very little post processing involved. I used Hueforge to…
Print settings 0.2 mm layer height I recommend using a textured build plate – it makes the inside of the card look awesome! Check out my other greeting cards in the Greeting card collection Demo videos 3D printed greeting card YouTube…
This is a folded thank you card (folded size: 3"x5") with "thanks" on the front of it. Choose filament colors to suit your needs. I'd love to see what color combinations you choose -- please share your makes! Print settings 0.2 mm layer…
This is a folded thank you card (folded size: 3"x5") with "thanks" on the front of it and slits inside to hold a gift card. Choose filament colors to suit your needs. I'd love to see what color combinations you choose -- please share your…
Greeting Troll (full eyes and concave eyes) If you want my models early, please consider supporting me on patreon - patreon.com/onuheino
This is a blank model of a card, you can edit the files freely to add your own text and designs to the card. You should have your text be inset by two layers, or have it be inset in a different color. The hinge will not close properly if…
Simple greeting card that uses filament for the hinge. Use your slicer to add text as you wish. 2/8/24 updated model slightly for better fit
Say hello to your new favorite feline! This delightfully chonky cat is mid-greet, mid-yawn, and fully majestic. Some supports are needed. I used organic-style supports, which peeled off cleanly with minimal effort. Happy Printing! Want to…
A cute and small greeting santa figurine!
Celebrate the holiday season with a touch of modern flair! This 3D-printed Merr X-mas headband combines festive cheer with a nod to social media, showcasing a playful "Merr X-mas" text and the iconic X logo at its center. Designed for fun…
This 3D-printed Christmas card features two collapsible Christmas balls that are initially printed flat but can be easily transformed into 3D ornaments. One of the balls incorporates a built-in light to provide a warm, festive glow when…
I decided to make a plaque of the iconic quote from The Last Starfighter: “Greetings, Starfighter. You have been recruited by the Star League to defend the frontier against Xur and the Ko-Dan armada.” The example was printed on Prusa XL…
Theese holders are very simply and useful. I printed in two version, the first version allows to keep the card open, the second simply holds the card. You can print both in 5 minutes each.
more available on www.thingiverse.com/thing:6743026
You can use any print settings as you desire, but these are the ones I used. Perimeters | 3 Layer Height | 0.15mm Infill | 80% Cubic Supports | None needed! Nozzle Size | 0.40mm…
Insert for the game EGO , designed by Reiner Knizia and published by Bitewing Games. It's a great game that comes with really nice custom components in the deluxe edition, but is completely missing any type of storage inside the box. This…
Holds greeting cards, fits in most common slat wall.
Fits licenseplateholders with common in Sweden like this one: https://www.formac.se/bil-tunga-fordon/skylthallare-till-eu-skylt-44.html STEP file included for customization. Need multimaterial or Toolchanger, 3 colors. Includes variant…
This is a design for a gumball coin mechanism used for a greeting card. The gumball machine is cut from cardboard and clear plastic. The simulated coin mechanism makes for a realistic gumball machine with twist handle and flap door.…
Greetings for Christmas, New Year, Easter and Thanksgiving. Rotate the block to show the appropriate greeting and place in stands on your desk/table. Print instructions Pint in any material.
greetings from saturn You can find all my models here , thank you who will appreciate with a download or with a like
You can use any print settings as you desire, but these are the ones I used. Perimeters | 3 Layer Height | 0.15mm Infill | 50% Cubic Supports | None needed! Nozzle Size | 0.40mm If you open the .3mf in PrusaSlicer, you'll notice a…
Based on a mobile pendant, a dove of peace (see photo). I made a kit card version of this, to send as seasonal greetings. The 3MF file has no text, and no colours. Use your slicer to personalise your kit-card. See photo's for inspiration.…
This 3D model showcases a coiled snake, boldly emerging from an elaborate frame of swirling designs and intricate detailing. The snake's head is the centerpiece, with sharp, well-defined fangs and a dynamic posture. Surrounding the snake…
WOPR - Greetings, Professor Falken - License Plate Frame Print Settings Printer Brand: Creality Printer: CR-10 Rafts: Doesn't Matter Supports: No Resolution: 0.2mm Infill: 25 Category: Signs & Logos
🎃🚽 Waving Toilet Mummy – Spooky Greetings! 👋💀 Not every mummy is scary – some just want to say hello! This little one is sitting on its creepy skull-decorated throne , wrapped in bandages and raising its hand as if to greet you. The mix…
This is a basic model for a printed card to contain a photo sensitive WT2003 USB mp3 player module https://www.amazon.co.jp/-/en/Recording-Rechargeable-Lithium-Battery-Sensitive/dp/B07CSTF378 When opened the light should trigger the…
This heavy-metal–inspired Season’s Greetings artwork transforms classic holiday cheer into a bold, gothic winter aesthetic. Jagged frostbitten lettering dominates the composition, surrounded by skeletal ornaments, shadowed pine trees,…
"Rauhallista joulua" wishes you calm and peaceful Christmas in Finnish. The stick was designed to be two-color: forest green circle / bow / stick and silk silver for the text. Simple design, only one color change. Change to silver at the…
I had a lovely 3d Christmas card kept folding itself up again. So designed a small corner to keep it open. There are two versions, one with 90 degree angle and one with 110 degree angle to choose from. The corner can accommodate cards up…
A key chain to greet the huzz
I like to put up cards I've received on a shelf above my desk, but I don't like that it blocks my view of the items on the shelf. To solve the problem, I designed these hangers (based on the "Wall Paper Clip" by @primo) to allow cards to…
Please visit http://www.myminifactory.com/object/view/624/Seasons-Greetings-Ornament and download a copy of this model if you really enjoyed it. Thanks! Seasonal ornament designed for this years www.MyMiniFactory.com winter holiday 3d…
My first design and contribution to this wonderful community. We are used to seeing many Chinese New Year greetings with standardised greetings. The greeting used here plays on the chinese name of Jurongville Secondary School - 丰嘉, to…
A nice wall-mounted piece of decoration for bedrooms. If you use luminous filament for the moon part, it will glow in the dark. download the zips and only the .zip s. The other files get confusing to track which one is which.
Modeled after a popular cat, who says hello, and is a kitty. You need 2 heatsinks, and the right screws
This 3D-printed Christmas card features two collapsible Christmas balls that are initially printed flat but can be easily transformed into 3D ornaments. One of the balls incorporates a built-in light to provide a warm, festive glow when…
Bring some extra cheer to your 3D printer this holiday season with the Santa's Sleigh Snap-Card ! This unique model combines the fun of a Christmas greeting card with the satisfaction of a 3D-printed display piece. The design prints…
My first design and contribution to this wonderful community. We are used to seeing many Chinese New Year greetings with standardised greetings. The greeting used here plays on the chinese name of Jurongville Secondary School - 丰嘉, to…
I like to put up cards I've received on a shelf above my desk, but I don't like that it blocks my view of the items on the shelf. To solve the problem, I designed these hangers (based on the "Wall Paper Clip" by @primo) to allow cards to…
This card has a hinge. Place both parts of the card down on a flat surface with the hinges mating. Then put the hinge pin through the hinges. It has a press fit, so should not fall out. To mod the card for your grad, print the STLs…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
Make your friends and family feel seen and loved.
