1 / 5
Canon Pixma IP6600D Automatic Slot Feeder (Paper Input) Tray — zdjęcie 1
1 / 5

Canon Pixma IP6600D Automatic Slot Feeder (Paper Input) Tray

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Canon Pixma IP6600D Automatic Slot Feeder (Paper Input) Tray

Ocena
0 / 5
Polubienia
0
Pobrania
2
Wydruki
0
Wyświetlenia
55
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Office
Licencja
Creative Commons — Attribution — Noncommercial

The hinge was broken on my paper input tray so I recreated the entire tray. I realized it was also missing the paper straightening flap that (apparently) automatically folds out. I recreated this flap from a few pictures, included in the repo now, I was able to find online. I also recreated the sliding extension piece so I had a 100% complete recreation of the entire paper input tray.

For the straighening/alignment flap you need a 1.5mm DIA x 10mm L metal rod and a torsion spring. The model uses McMaster-Carr Part # 9271K644 for the spring, which has a 1.7mm shaft DIA and ~9.5mm length length.

Snaps together tightly. Glue for extra strength if you want.

All parts should be printed slowly with a 0.16mm layer height for best results.

My parts are designed with this layer height in mind. 

Git Repo: https://github.com/captmicr0/Canon-Pixma-IP6600D

Tagi