1 / 3
E3NG V1.2 Fysetc Portable Input Shaper Adapter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fysetc Portable Input Shaper Adapter to fit on to the E3NG V1.2 toolhead
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 33
- Makes
- 0
- Views
- 380
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Fysetc portable input shaper board adapter for the E3NG V1.2 4010 and 4020 toolheads.
BOM:
- 2x M3x5
- 2x M3x25
Instructions:
Screw down the Fysetc board to the bracket using the 2 M3x5 screws.
Remove the original M3x20mm screws from the lower half of the toolhead.
Place the adapter into the holes where the screws were and insert the M3x25mm screws through the adapter and toolhead.
Done