1 / 3
FYSETC Portable Input Shaper mount for Kobra Neo — image 1
1 / 3

FYSETC Portable Input Shaper mount for Kobra Neo

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A simple design for mounting the FYSETC Portable Input Shaper on the Anycubic Kobra Neo. Only existing screws used.

Rating
0 / 5
Likes
1
Downloads
8
Makes
0
Views
76
Reviews
0

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution — Noncommercial — Share Alike

This is a custom-designed mount for the FYSETC Portable Input Shaper (PIS), tailored specifically for the Anycubic Kobra Neo. Inspired by this MakerWorld design, but improved for full compatibility with the Kobra Neo — no additional screws or modifications required.

Unlike the referenced design, which I was unable to mount on the X-axis, this version makes use of the existing screws in the print head, offering a simple installation process.

Instructions:

  1. Remove the blue cover from the print head.
  2. Use the two screws from the cover to mount the FYSETC PIS directly to the model.
  3. Print this mount as described.
  4. While the bed is still warm, install the FYSETC PIS onto the mount using the two screws.
  5. Run the Klipper resonance test for the Y-axis.
  6. Remove the mount from the bed, and attach it behind the print head using the remaining screw.
  7. Run the Klipper resonance test for the X-axis.


See detailed instructions by original author:
https://www.reddit.com/r/anycubic/comments/18cled0/tutorial_add_input_shaping_to_the_kobra_neo_for_4/

Print settings:

Supports: Not required

Orientation: Print flat on the bed

Tags