FYSETC Portable Input Shaper mount for Kobra Neo
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple design for mounting the FYSETC Portable Input Shaper on the Anycubic Kobra Neo. Only existing screws used.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 76
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a custom-designed mount for the FYSETC Portable Input Shaper (PIS), tailored specifically for the Anycubic Kobra Neo. Inspired by this MakerWorld design, but improved for full compatibility with the Kobra Neo — no additional screws or modifications required.
Unlike the referenced design, which I was unable to mount on the X-axis, this version makes use of the existing screws in the print head, offering a simple installation process.
Instructions:
- Remove the blue cover from the print head.
- Use the two screws from the cover to mount the FYSETC PIS directly to the model.
- Print this mount as described.
- While the bed is still warm, install the FYSETC PIS onto the mount using the two screws.
- Run the Klipper resonance test for the Y-axis.
- Remove the mount from the bed, and attach it behind the print head using the remaining screw.
- Run the Klipper resonance test for the X-axis.
See detailed instructions by original author:
https://www.reddit.com/r/anycubic/comments/18cled0/tutorial_add_input_shaping_to_the_kobra_neo_for_4/
Print settings:
Supports: Not required
Orientation: Print flat on the bed