P
Printables
Fysetc Input Shaper bed mount for Elegoo Neptune 4 Pro
Print in PLA, 0,2mm, no support. You need 4 screws and nut, M3x8 or M3x6.
Wyniki wyszukiwania: fysetc
Liczymy pasujące modele…
P
Printables
Fysetc X Axis Endstop for CNC XY Joint Kit
2025.03.20 Edit to model, cleaned up geometry and a bit shorter.
P
Printables
Voron 0 0.2 Fysetc CNC Bed Frame 3010 Blower Mount
This is a complimentary bracket to be used with the terminal block by @driftrotor. I wanted to use a spare 3010 blower fan I had for chamber circulation. Optional mounting for a small JST interconnect PCB from a LDO kit, if you have that…
P
Printables
Fysetc Hot Key side mount for Voron.
I wanted a way to mount my Fysetc Hot Keys to the side of my Voron. Bom: 2x M3x8 screws 4x M3x16 screws 4x Voron standard M3 heatset inserts 2x M3 roll in or hammer nuts
P
Printables
Fysetc UCan Case with mounting options
I needed a case to externally mount my UCan to an M10 Rod on my old printer, so I made this. Includes a version with a flat bottom to just use it as a loose gadget and 2 versions each of the top piece with a cutout for a small cooler on…
P
Printables
Fysetc bed frame - Voron 0 Plate stops / guides
Stainless rod/pins/dowels contact the bed, which prevents any softening of the printed parts. Hardware needed: 2x m3 hex nuts 2x m3x?? bolts (almost any head type is suitable 4x 3mm stainless rod (likely 25mm long for most people - It…
P
Printables
Connection Mount for Fysetc CNC Bed
I like Driftrotor's Voron V0 Bed Fans & Connection Mount for Fysetc CNC Bed but I wanted to add breakaway for NeoPixel cable used for also Driftrotor's Fysetc CNC Bed Stealth Front With Neopixel . For the housing for the 3 pin JSTs, I…
P
Printables
Fysetc MiPi DSI 5" 45° Mount
A remix of a remix to work with the below Voron Skirt 45° mount. My remix only uses 2 Voron spec heat inserts as there wasn't room for 4 but the screen is held solidly with only 2 at the bottom.…
P
Printables
Prusa mini FYSETC clone 3.2 inch LCD with side USB slot
Prusa mini FYSETC clone 3.2 inch LCD with side USB slot to fit with mold injected front plate. Accomodates the larger than original clone screen, and fits with the cavity of original molded part, with space for side mounted USB extension…
P
Printables
FYSETC Coupler blocks adapter 12 color option
After printing the parts for my FYSETC ERCFv2 12 colors, I found out that the ERCT coupler blocks are actually meant to be printed from a clear filament (but the FYSETC files mentions it as a opaque printed part) I decided to make it look…
P
Printables
Improved Fysetc PanelDue 7i case
Two version for the front: front_1part : single front part to print front_2part_A+_B: two parts, base front + front frame to print separately and use some glue for multi color look, the photo shows the two part glue version Make sure to…
P
Printables
Fysetc DSI Touch Screen mount for Ender 3 NG Flat Mesh Skirt
Bracket to attach a Fysetc 5 Inch DSI touchscreen display to the Flat Mesh Skirt of your Ender 3 NG. The 'official' display mount almost fits, but not really because the Fysetc display has slightly different screw hole placement, a DSI…
P
Printables
Fysetc ADXL V1.0 Snap Mount for Dragon Burner (Voron 0.2)
This mount is designed to hold a Fysetc ADXL V1.0 accelerometer on the Dragon Burner toolhead of a Voron 0.2. It features a tool-less snap-fit design , meaning no screws are required . The mount can be quickly installed and removed,…
P
Printables
Fysetc H36 Backplate for A4T / Wristwatch G2 (with and without PUG)
I needed a backplate to mount the Fysetc H36 Combo v2 to my Wristwatch G2 on my A4T. Ziptie Version This version only has a strain relief with zipties. You need two heatset inserts for mounting the H36 to the backplate and two zipties.…
P
Printables
Fysetc Portable Input Shaper mount for Creality Sprite Pro
I recently remixed a portable input shaper mount, but after watching a Modbot video on the best location for input shaping decided to design a new one which lowered the Portable Input Shaper closer to the nozzle. Without removing the part…
P
Printables
XL Front Mount Nozzle Brush (using Voron FYSETC Brushes)
02/09/24 - Rev 1 (GCode Only Change): This is a slight change to start the wipe cycle at Y-1 vs Y-9 which essentially just reverses the order it occurs in in the Y AXIS, as I noticed the move directly to Y-9 was pretty loud. This calms…
P
Printables
Fysetc Spider K1 mount (it's a mess)
Fysetc Spider mount: https://www.printables.com/model/293307-fysetc-spider-motherboard-holderfan-shroud Manta M8P K1 mount: https://www.printables.com/model/684188-k1-k1-max-to-manta-series-mainboards-adapter-kit
P
Printables
ADXL 345 FYSETC BED MOUNT
It's really straightforward to adjust the shape of the bed on any printer. Just print the model and fix the ADXL345 from the FYSETC brand on it to run the test.
P
Printables
Fysetc ERB 2.0 Bracket
I replaced the Easy-Brd in by ERCF with a Fysetc and wanted a similar mount. Oddly, the mount I had held the board in specific orientation which I could not find in other mounts online (and I couldn't even find the original mount of this…
P
Printables
Fysetc Input Shaper bed mount for Elegoo Neptune 4 Pro
Print in PLA, 0,2mm, no support. You need 4 screws and nut, M3x8 or M3x6.
P
Printables
FYSETC Prusa Enclosure Corner Piece
This is for the FYSETC prusa enclosure that's available here: https://www.aliexpress.us/item/3256805761945929.html FYSETC provides this corner piece stl in their upload here, but it has a chunk that covers the screw holes and wouldn't…
P
Printables
Fysetc E4 OnStep case for Explore Scientific iExos-100 PMC-Eight
This is a simple case to replace the stock iExos-100 PMC-Eight board with a Fysetc E4. The board screws into the base using M3 screws and M3x5x4 threaded inserts. You can then re-use the existing M2.5 screws from the iExos-100 housing to…
P
Printables
FYSETC Prusa Enclosure Door Handle (Debranded)
This is for the FYSETC prusa enclosure that's available here: https://www.aliexpress.us/item/3256805761945929.html Simple enough to do, but I just removed the FYSETC logo from these handles. Category: 3D Printer Parts
P
Printables
FYSETC Spider (All Versions) Stepper Fan Shroud
Available in 2 or 3 Fan variants, simply prints upside down and screws in using the original fixing points and longer (40mm) screws. I designed this to be printed at .2 layer height, it requires 4x Heatset inserts per fan. It was designed…
P
Printables
Fysetc Spider stepper driver cooling duct
Cooling duct for the stepper drivers for my custom Voron build. It suites 6 or 7 steppers drivers. Pick the file you need. Note: didn't test the 7-stepper driver version, since my printer has only 6 (extruder is on the toolhead board).
P
Printables
fysetc mini 12864 panel v2.1 for flsun q5
after I switch the board from the junk robin nano to mks sgen_l and fysetc mini 12864 panel v2.1 i add a case for it it will press fit and you can use 2 sided tape to attach it if it's not fitting for you print at 101% Print Settings…
P
Printables
not-a-Wago and 3010 fan mount for Fysetc CNC bed frame (Voron 0)
A way to mount 3 AliExpress knockoff Wago's, a 3010 bed fan, and some MicroFit 3.0 connectors. And some optional cable management. The design is not an actual remix but inspired by Driftrotor's work (see remix section). Technically it…
P
Printables
Kappy mount for Fysetc Spider
Mount for the Fysetc Spider 2.3 board for Rolohaun Design's Kappy printer: https://www.printables.com/model/625544-kappy
P
Printables
flsun sr adxl345 fysetc mount
this is a mount for your adxl345 on a sr with extended meltzone
P
Printables
FYSETC RP2040 PIS MOUNT FOR SV07/Plus (SOVOL)
This mount can be installed on both axes as shown in the photo. It allows one to use the inexpensive FYSETC USB-C Portable Input Shaper (PIS) Accelerometer as permanent as well as temporary installs. Print in PETG or ABS/ASA in the…
P
Printables
Fysetc E4 board adapter for Ender 5 Pro
I needed an adapter for my Ender 5 to fit a Fysetc E4 board, so I created this quickly to do just that. You will need to cut a gap on the side so that you are able to reach microSD and USB, as I had already made this hole for my BTT 1.4…
P
Printables
FYSETC Voron 0.2 Motor Panel Mod
This is a remix of a motor panel mod by @Akio for FYSETC Voron 0.2 kits.
P
Printables
FYSETC Portable Input Shaper (PIS) MK8 nozzle mount
Same configuration as the original, I just modified it so that it could be used on MK8 nozzles with a 6mm hex profile.
P
Printables
Fysetc Stealthchanger Distribution Board Bracket
Fysetc Stealthchanger Distribution Board Bracket for din rail adaptation. It's the black piece between the din rail adapter and board.
P
Printables
Filament Sensor for Fysetc CNC Sherpa mini Extruder
I modified "Sherpa mini filament sensor - PC4-01 connector" to fit my setup better, so though I would share. I added 8 mm shaft to replace the Metal ECAS in the Fysetc Sherpa mini CNC version Extruder. I used a 13 mm reverse bowen tube in…
P
Printables
FYSETC Pi Mipi 5" DSI LCD V1.1 Screen Mount for Switchwire / Enderwire
Purchased the Fysetc DSI display as it was much cheaper than the BTT one but found that it's a much slimmer display with the ribbon cable in the middle instead. Remixed to make it work for the Fysetc 5" DSI display. Update : Added a…
P
Printables
Fysetc X Axis Endstop for CNC XY Joint Kit
2025.03.20 Edit to model, cleaned up geometry and a bit shorter.
P
Printables
FYSETC SD-WIFI Case
This is a simple case for the FYSETC SD-WIFI adapter which allows a Micro SD Card to be accessed over wifi while being used.
P
Printables
ZeroG electronics DIN Fysetc Spider
Below is copy/paste from the source model . --- BOM 4* M3 heatset inserts 4* M3x6 or M3x8 screws (BHCS or SHCS) Printing settings Would recommend using ABS or PETG to allow the part to flex without breaking. Some PLA+ might do the job. No…
P
Printables
Sherpa Mini CAN mount - FYSETC
voron kit from FYSETC has can cable attached to the extruder using threads instead of zip ties so I just added threads print with supports placed on flat side
P
Printables
Voron 0 0.2 Fysetc CNC Bed Frame 3010 Blower Mount
This is a complimentary bracket to be used with the terminal block by @driftrotor. I wanted to use a spare 3010 blower fan I had for chamber circulation. Optional mounting for a small JST interconnect PCB from a LDO kit, if you have that…
P
Printables
Stealthchanger Fysetc Shuttle Guide
Helps guide the backplate on to the CNC shuttle. Built in supports can be removed by pinching the part and support together. Attach with 2x M3x6 BHCS.
P
Printables
Sherpa Micro to FYSETC M36 Bullant / Catalyst V2 - Toolhead Board Adapter Mount
This is currently installed on my printer for durability testing, so treat it as a WIP. During my FYSETC Voron V0.2 Build, I had to adapt the shipped Bullant Toolhead Board to my Dragon Burner & Sherpa Micro Assembly. I borrowed the…
P
Printables
ERCT FYSETC ERB adapter
A simple ERCF - ERCT controller board adapter for the FYSETC ERB. This adapter uses m3 heatset inserts to mount the board and installs to the ERCT MMB Support Arm Endcap. Included a version with and without built-in supports for the…
P
Printables
Voron V0 fysetc cnc bed extra wago under the bed
put an extra wago mount and removed one of the fan screws
P
Printables
EQ6-R Onstep upgrade Fysetc E4
This side cover for the Skywatcher EQ6-R has mounting points for a FYSETC E4 used as an Onstep controller. On the top side, there is a mounting point for an XL4015-based DC-DC converter to provide 8.3 V for Canon dummy batteries. This…
P
Printables
Robin Nano V1.2 to Fysetc E4 adapter
I needed to change the board in my printer with a Robin Nano V1.2 so made this adapter.
P
Printables
Fysetc mini 12864 case
Fysetc mini 12864 case Material list 4 units Insert Nuts M3 L3 4 units Screws M3x10 DIN 912 Lista de materiales 4 uds Tuercas insertables M3 L3 4 uds Tornillos M3x10 DIN 912 Updated version / Versión actualizada : Front Cover Rv02 The…
P
Printables
Fysetc F6 electronics cover for Prusa clone
This electronics box is a resize of the original Einsy base and doors models to fit the Fysetc F6. I have an old Prusa MK2.5S clone with a Prusa Bear frame, and works with it like a charm. For the original frame the upper holes have to be…
P
Printables
Fysetc H36 Strain Relief Mount for Sherpa Mini
A mount for the Fysetc H36 (Note: V1.3 with the molded cable only! V1.2 coming soon) toolhead board to attach it to the back of a Sherpa Mini extruder and provide strain relief and retention for the connectors. The strain relief is not on…
P
Printables
Mounting adapter for Fysetc Spider v2.2 and Pi Zero 2 W
This is an adapter that fits onto the standoffs on an E5 pixie enclosure box, and allow snap-in mounting of a Fysetc Spider board. It has cable guides: e.g. endstops and such can be run on the left side below the guide power in and bed…
P
Printables
FYSETC Portable Input Shaper mount for Kobra Neo
This is a custom-designed mount for the FYSETC Portable Input Shaper (PIS) , tailored specifically for the Anycubic Kobra Neo . Inspired by this MakerWorld design , but improved for full compatibility with the Kobra Neo — no additional…
P
Printables
Ender 3 V3 SE fysetc shaper bed mount
Remixed to adjust for fysetc portable input shaper. This version is also only for the bed and found the fysetc to large for the toolhead. You should still use the washers from the original model.
P
Printables
Fysetc Voron 2.4 Carbon Fiber X Mounts Hex Covers
Covers for the Fysetc Voron 2.4 Carbon Fiber X Mounts
P
Printables
E3NG V1.2 Fysetc Portable Input Shaper Adapter
Fysetc portable input shaper board adapter for the E3NG V1.2 4010 and 4020 toolheads. BOM: - 2x M3x5 - 2x M3x25 Instructions: Screw down the Fysetc board to the bracket using the 2 M3x5 screws. Remove the original M3x20mm screws from the…
P
Printables
Fysetc Hot Key side mount for Voron.
I wanted a way to mount my Fysetc Hot Keys to the side of my Voron. Bom: 2x M3x8 screws 4x M3x16 screws 4x Voron standard M3 heatset inserts 2x M3 roll in or hammer nuts
P
Printables
Fysetc SpyderPi Case
A case for a Fysetc Spyder v2 and Raspberry Pi 3B case with 4010 cooling fans.
P
Printables
FYSETC load cell- Kobra 3 Max
Found this neat load cell on amazon and got it for testing. https://www.amazon.com/dp/B0FBGDNF2W
P
Printables
Double-Shear Bearings MOD for Fysetc Venture XL
One tip that I would give who is building the Venture XL is to add double shear bearings to the AB motors. This helps with properly aligning the AB drive assembly, and of course, highly reduces the load on the motor shaft's bearings. It…
P
Printables
Fysetc Hexa Distro Fusion backpack
Backpack for the Fysetc Hexa Distro Fusion board. Interfaces with N3mi Umbilical Exhaust plates v2 ( https://github.com/DraftShift/CableManagement/tree/main/UserMods/N3MI-DG/Umbilical_plates_V2 ) Uses a PUG for cable strain relief…
P
Printables
Fysetc CNC Bed Stealth Front With NeoPixel
-UPDATED - Wanting the Sweet CNC bed from Fysetc but also wanting that Sweet Stealth Look on the front with the Voron Logo from Maple Leaf Makers? Then you have come to the right place! after originally adapting the stealth front to cover…
P
Printables
Fysetc H36 Mount - Strain Relief / Cable Management / Umbilical
Print flat. Fiberglass mount extends down to screw holes to reduce cantilever forces. Update 11/AUG/2025: Stronger version, reinforced with an m3x45+ screw to give another zip tie point, 2mm fiberglass tube mount extended through the…
P
Printables
Holder remix for double t Fysetc Spider Stepper Driver Cooling
I don't like the holder from the model so i created a new one. Print it with support.
P
Printables
Ender 3 Control Box 3.0 right side | FYSETC Mini 12864 RGB
And the next part for the right side of the Ender 3 :) Fits a FYSETC Mini 12864 RGB Display, a Raspberry Pi and whatever you want. I made no mounting points, so feel free. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts:…
P
Printables
Fysetc E4 OnstepX Case
I designed this case for the FYSETC E4 in Fusion 360 so that it can also house the BME280, with its temperature/humidity sensor facing outwards for more accurate ambient readings. I also added a physical mount for the DS3231 RTC, so it…
P
Printables
Fysetc PIS adxl acelerometer prusa mk3s mounts
Make Prusa MK3 great again !!!! Needed a mount for my accelerometer, because zip ties was not an option when started to tuning the steppers/drivers for fine tunning. BOM 5x Voron style threaded inserts (M3x5x4) 1x M3 hex nut 2x m3x6 bolts…
P
Printables
Displaygehäuse für - display housing for FYSETC PanelDue
----for english, please scroll down---- --- moved from MyMiniFactory --- Displaygehäuse für eine FYSETC PanelDue für den Snapmaker J1, könnte aber auch für andere Drucker geeignet sein. Die Tasten der PanelDue können über einkonstruierte…
P
Printables
Voron 0.2 Fysetc V1.1 Mini Stealthburner HEX Edition
Took the Fysetc version of the mini stealthburner (That has the right "channels" for the neopixel LEDs that they include in their kit) and added some swag. I personally printed mine with 4 walls, 40% infill (Gyroid) and 5 top and bottom…
P
Printables
Dragon Burner v8 Sequin Mounts for FYSETC RGB Sequins
This remix is based on three files from the Dragon Burner project : Sequin_Mount.stl Sequin_Soldering_Jig.stl Carrier_Sequin.stl The models have been modified to fit FYSETC RGB Sequins (also available on AliExpress). 🔧 Notes &…
P
Printables
Fysetc E4 case with full OnstepX functionality
Fysetc E4 case with full OnstepX functionality < Wiring > https://onstep.groups.io/g/main/wiki/32747 648 connector Motor : black(A+), red(B+), green(A-), blue(B-) End stop : yello(min), brown(GND), orange(V) < BOM > Brass insert(M3, OD…
P
Printables
FYSETC Distribution Board mount for DIN Rails
This project is designed to mount the FYSETC_Distribution_Board to mount to DIN rails. This is useful for StealthChanger builds. Print Instructions: If the mount is inside the printer it is recommended to print in ABS or ASA, otherwise…
P
Printables
FYSETC Hexa Distro Fusion Board DIN Mount
This project is designed to mount the FYSETC_Hexa_Distro_Fusion_Board to mount to DIN rails. This is useful for StealthChanger builds. Print Instructions: If the mount is inside the printer it is recommended to print in ABS or ASA,…
P
Printables
Fysetc UCan Case with mounting options
I needed a case to externally mount my UCan to an M10 Rod on my old printer, so I made this. Includes a version with a flat bottom to just use it as a loose gadget and 2 versions each of the top piece with a cutout for a small cooler on…
P
Printables
Dragonburner V8 Fysetc (mini SB) neopixel carridges V1
Here is config for klipper with M36 board and catalyst mainboard: [neopixel logo] pin: head:PB13 chain_count: 1 color_order: GRB initial_RED: 1 initial_GREEN: 1 initial_BLUE: 1 [neopixel nozzle] pin: head:PB0 chain_count: 1 color_order:…
P
Printables
Fysetc UCAN mount M3
A Remix for using M3 Screws. I use it to mount a UCAN adapter on a Sovol SV08. PLA, PETG, ABS doesn't matter, use what you like 3 top and bottom layers 3-4 walls
P
Printables
Fysetc CAN Disto Board Toolchanger Backpack Base
All you will need for this are 10 M3 voron standard (M3xD4.6xL4) heat inserts and 10 M3x6-8 screws. I would use button top. ** If you want to use just 4 of each (1 for each corner) instead of using all the holes for inserts and screws,…
P
Printables
Paneldue 5i Display Duet Fysetc clone display 5 inch for Ratrig V-Minion
This is is a remix of LumberjackEngineering's PanelDue case for the original Duet display. I modified the case for the clone version (from fysetc 5 inch V3). What I changed: Cutout for flash cable and SD card Cutouts for reset and erase…
P
Printables
SV08 Tool Changer - Fysetc Hexa Distro Fusion Backpack
I designed and added a backpack module for the existing umbilical plate. This backpack is specifically created to hold the Fysetc Hexa Distro Fusion and can be used in combination with the existing umbilical design. It improves mounting…
P
Printables
Fysetc bed frame - Wago + 30mm (3010) fan mount
You will need: 2x 12mm m3 bolts (fan) 2x 16mm m3 bolts (mounting to frame) 4x m3x4x5 thread inserts Sorry, I forgot to add a fan connector. I might in future, but I'm bored with this now, so probably not. Feel free to do it yourself :P
P
Printables
Stealthburner Cable Cover with 2525 FAN for FYSETC SB COMBO v2
This is ongoing project. I will update it as it progress thru possible iterations and extra parts i'll build for this toolhead. FYSETC SB COMBO v2 is an USB/CAN toolboard for stealthburner toolhead. Original stealthburner cable cover were…
P
Printables
Ender 3 S1 pro 5in FYSETC klipper screen
I used this screen FYSETC You only need 3 screws (6#32 or M3 and 5mm long) The frontal screen shell just fits without glue or screws
P
Printables
OnStep Fysetc E4 Enclosure
English description below Für das phantastische OnStep-Projekt von Howard Dutton ( https://onstep.groups.io/g/main ) hier ein Gehäuse für eine Steuerung auf Basis des 3D-Drucker-Mainboards Fysetc E4. Vorab: Das ist kein Projekt für…
P
Printables
Fysetc HeatBed Cable Holder Strain Relief
for anyone who bought this fysetc magnetic bed: https://s.click.aliexpress.com/e/_DCBQu2T you will need an m3x8mm screw and m3 nut.
P
Printables
Fysetc bed frame - Voron 0 Plate stops / guides
Stainless rod/pins/dowels contact the bed, which prevents any softening of the printed parts. Hardware needed: 2x m3 hex nuts 2x m3x?? bolts (almost any head type is suitable 4x 3mm stainless rod (likely 25mm long for most people - It…
P
Printables
Fysetc H36 mount for dragonburner with sherpa mini
Print config: Whatever. Though it's recommended to print it in asa/abs with voron config. After assembling my machine I might see fit to add a piano wire for strain relief.
P
Printables
Fysetc Hexa Distro Fusion Fanny Pack NG
Clean Geometry: Legacy artifacts and unnecessary design elements from the original Fanny Pack model had been stripped away Board Mounting Bracket: The mounting bracket has been re-designed to use M3 heat-set inserts for all four board…
P
Printables
Fysetc 5i Clone PanelDue Touch Screen Case For Hypercube
Paneldue 5i clone mount for use on my Hypercube. Used F2D-SolidInk's design as a base for the display housing. Print 1 housing, 1 angled mount, and 1 mirrored angled mount to use. solidworks file included for modifying the bracket if…
P
Printables
Connection Mount for Fysetc CNC Bed
I like Driftrotor's Voron V0 Bed Fans & Connection Mount for Fysetc CNC Bed but I wanted to add breakaway for NeoPixel cable used for also Driftrotor's Fysetc CNC Bed Stealth Front With Neopixel . For the housing for the 3 pin JSTs, I…
P
Printables
Fysetc MiPi DSI 5" 45° Mount
A remix of a remix to work with the below Voron Skirt 45° mount. My remix only uses 2 Voron spec heat inserts as there wasn't room for 4 but the screen is held solidly with only 2 at the bottom.…
P
Printables
Prusa mini FYSETC clone 3.2 inch LCD with side USB slot
Prusa mini FYSETC clone 3.2 inch LCD with side USB slot to fit with mold injected front plate. Accomodates the larger than original clone screen, and fits with the cavity of original molded part, with space for side mounted USB extension…
P
Printables
FYSETC Coupler blocks adapter 12 color option
After printing the parts for my FYSETC ERCFv2 12 colors, I found out that the ERCT coupler blocks are actually meant to be printed from a clear filament (but the FYSETC files mentions it as a opaque printed part) I decided to make it look…
P
Printables
Improved Fysetc PanelDue 7i case
Two version for the front: front_1part : single front part to print front_2part_A+_B: two parts, base front + front frame to print separately and use some glue for multi color look, the photo shows the two part glue version Make sure to…
P
Printables
Revo ADXL (Fysetc) Mount for Dragonburner
Built-in toolhead board accelerometers suck, as they are positioned too far from the nozzle. This aims to position the Fysetc portable input shaper rigidly and as close to the nozzle as possible. You will need: Trim the PCB as pictured.…
P
Printables
Fysetc DSI Touch Screen mount for Ender 3 NG Flat Mesh Skirt
Bracket to attach a Fysetc 5 Inch DSI touchscreen display to the Flat Mesh Skirt of your Ender 3 NG. The 'official' display mount almost fits, but not really because the Fysetc display has slightly different screw hole placement, a DSI…