Fysetc LED Strip Holder for ERCF v2 / ERCT
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple holder to mount LED strip from Fysetc ERCF v2 kit onto vanilla ERCT coupler blocks.
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 103
- Wydruki
- 1
- Wyświetlenia
- 769
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
A simple holder for LED stips supplied in ERCF v2 kits by Fysetc. Works with any vanilla (non-Fysetc) ERCT couplers – both 90° from RC1 and 180° from RC2. If you don't like the couplers provided by Fysetc, or if you already printed all the vanilla parts before even receiving the kit (like I did 😅) and want to reuse the parts now, then this might be useful for you.
There are 2 parts: 2 channel wide and 4 channel wide. If you have an 8 channel kit, you'll need to print 2-4-2 parts. For 12 channel kit, you'll need 4-4-4 (untested – volunteers needed!).
BOM:
- 3 x M3x6 or M3x8 SHCS;
- 3 x M3x5x4 threaded inserts (standard Voron ones – you probably have some left from your ERCF build).
Printing:
- Just drop the models into your slicer and print. 🙂 If you keep the orientation, then the parts can be printed without supports.
- ABS recommended, PETG should work too.
- Use default Voron print settings: 0.2 mm layers, 0.4 mm lines, 3 perimeters, 5 top and bottom layers, 20% or more infill of your choice.
Assembly:
- Install the heat set inserts. I'd recommend to do it from the back (i.e. the side that will face the coupler blocks) – this will ensure a gap between the inserts and the PCB.
- Slide the holders into the coupler blocks from below and firmly push them all the way in:
- For 8 channels: 2-4-2
- For 12 channels: 4-4-4
- Align the holders, install the LED strip.
STEP files are included – please feel free to remix! 😊