1 / 2
FYSETC Portable Input Shaper (PIS) v6 nozzle mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple mount for the FYSETC PIS on a standard v6 nozzle
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 138
- Wydruki
- 2
- Wyświetlenia
- 590
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v3.0
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 2) (Komentarze: 2)Remiksy (1)Kolekcje (18)Powiązane
I liked the idea of a nozzle mount that didn't require removing the nozzle to fit the PIS, so I made a version that works for standard v6 nozzles with a 7mm hex profile.
Print settings
I recommend using a 0.4 mm nozzle, 0.2mm layer height. Print the model diagonally as shown below. (the cutout at the bottom is necessary for the electronic components.) No brim or supports necessary.

BOM
- M3 x 8mm self tapping screw, 2x, for mounting the PIS
- M3 x 4 x 4 heat set insert
- M3 x 6 for the nozzle screw