Fysetc and BigTreeTech 12864 Mini Display Case with 2020 side attachment
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The 12864 Mini Display v1.0 from BigTreeTech is a clone of the Fysetc 12864 Mini Display V2.1 . There are a few cases…
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 235
- Wydruki
- 1
- Wyświetlenia
- 1691
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
The 12864 Mini Display v1.0 from BigTreeTech is a clone of the Fysetc 12864 Mini Display V2.1 .
There are a few cases on Thingiverse which look nice, but weren't able to attach the display on the left or right side of a 2020, 4040 or 4020 extrusion bar.
So, I remixed LoZa's (LMaker) very nice case ( https://www.thingiverse.com/thing:4570941 and https://www.printables.com/model/129522-fysetc-mini-12864-case ) so that this build contains three parts:
Front Cover - Based on LoZa/LMaker Front_Cover_rv02.stl
- Made the openings for the reset button more forgiving
- Closed the surroundings of the button to a nice square hole for the encoder
Changed the round edges to 45° seam which does have a similar nice effect, but is easier to print Rear Cover - Based on LoZa/LMaker Rear_Cover.stl
Removed the "1" and "2" number
- 1mm increased base
- Removed two screw hole and added 3 new for the side attachments
- Removed the round edges
Increased the square hole for the EXT1 and EXT2 connectors Extrusion_attachment_left / Extrusion_attachment_right
attachment bracket to connect the case on the side of the extrusion bar.
Note: "left" means the bracket is made to have the attachment on the left side of the display case. Features:
The Attachment is almost similar to my other BTT TFT24 side-mount ( https://www.thingiverse.com/thing:4760001 ) which also allows swiveling the display angle as you need it. You have a range of 45 degrees to find your perfect angle for your display.
Additional Parts:
4 screws: M3x10 for the case
2 screws: M3x8 for the extrusion attachment to the case
2 self-locking nuts for the extrusion bar and M4x10 screws.
Print Settings
Printer: Sunlu S8
Rafts: No
Supports: No
Resolution: 0.2
Infill: 20%
Filament: Extrudr PLA transparent
Category: 3D Printer Accessories
Update: 31.10.2022
I have slimmed down the rear part and remove around 3mm of material. It still works great and make it a bit more compatible to additional setups.