Fysetc and BigTreeTech 12864 Mini Display Case with 2020 side attachment
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The 12864 Mini Display v1.0 from BigTreeTech is a clone of the Fysetc 12864 Mini Display V2.1 . There are a few cases…
- Rating
- 5 / 5
- Likes
- 7
- Downloads
- 235
- Makes
- 1
- Views
- 1,691
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
The 12864 Mini Display v1.0 from BigTreeTech is a clone of the Fysetc 12864 Mini Display V2.1 .
There are a few cases on Thingiverse which look nice, but weren't able to attach the display on the left or right side of a 2020, 4040 or 4020 extrusion bar.
So, I remixed LoZa's (LMaker) very nice case ( https://www.thingiverse.com/thing:4570941 and https://www.printables.com/model/129522-fysetc-mini-12864-case ) so that this build contains three parts:
Front Cover - Based on LoZa/LMaker Front_Cover_rv02.stl
- Made the openings for the reset button more forgiving
- Closed the surroundings of the button to a nice square hole for the encoder
Changed the round edges to 45° seam which does have a similar nice effect, but is easier to print Rear Cover - Based on LoZa/LMaker Rear_Cover.stl
Removed the "1" and "2" number
- 1mm increased base
- Removed two screw hole and added 3 new for the side attachments
- Removed the round edges
Increased the square hole for the EXT1 and EXT2 connectors Extrusion_attachment_left / Extrusion_attachment_right
attachment bracket to connect the case on the side of the extrusion bar.
Note: "left" means the bracket is made to have the attachment on the left side of the display case. Features:
The Attachment is almost similar to my other BTT TFT24 side-mount ( https://www.thingiverse.com/thing:4760001 ) which also allows swiveling the display angle as you need it. You have a range of 45 degrees to find your perfect angle for your display.
Additional Parts:
4 screws: M3x10 for the case
2 screws: M3x8 for the extrusion attachment to the case
2 self-locking nuts for the extrusion bar and M4x10 screws.
Print Settings
Printer: Sunlu S8
Rafts: No
Supports: No
Resolution: 0.2
Infill: 20%
Filament: Extrudr PLA transparent
Category: 3D Printer Accessories
Update: 31.10.2022
I have slimmed down the rear part and remove around 3mm of material. It still works great and make it a bit more compatible to additional setups.