Liczymy pasujące modele…
Hi everyone! 😊 Due to popular demand, I decided to design my own enclosure for the Bigtreetech TFT 35 V3.0 display. This box supports the standard display emulation included with the printer and can switch to touch screen mode. I’ll be…
This is designed to be used with heated inserts, the size I used is 1/4“-20x12.7. But any ¼ inch insert should work, as long as it's not longer. The ones I used: https://www.amazon.de/dp/B09MTS6ZZQ It's a very simple and convenient way to…
A gantry plate for 3 roller wheels that fits on a 40mm wide v-slot aluminum extrusion. For a full assembly you need: 3 roller wheels with 24mm diameter 1 eccentric nut ID 5mm that fits in a 7mm hole 2 spacers ID 5mm 3 fasteners M5x28 or…
Simple and light K400 holder for my sim rig. It could fit other keyboards, i have no idea - feel free to try and let me know. It's not designed to use the keyboard on it, only to rest it while not in use. It appears to hold fine if doing…
Sturdy Corner Bracket with Ribbed Reinforcement – Heavy Duty for 2020 / 3030 / 4040 / 5050 V-Slot & T-Slot aluminum profiles Perimetric reinforcing rib for superior strength Optimized profile geometry – better resistance and easier…
4040 Rv2 Series V-slot T-slot Extruded Aluminum - Profiles Collection - Adjust the Z scale to obtain longer profiles Available in 5 variants: 4040 4 Sides Open 4040 1 Sides Open 4040 2 Sides Open (90°) 4040 2 Sides Open (180°) 4040 3…
4040 Foot Cap Low - Floor Mount Base Aluminium Profile - RV2 Series Suitable for: https://www.printables.com/model/1337775-4040-rv2-series-extruded-aluminum-profiles-collect All our designs are free to download and use—because sharing…
This is a fats and easy to use print to drill holes in the center of the v slots of the 4040 extrusions with m3-5 sizes
4040 Drill Jig Drill Guide Ø4 10-20mm Hole Centers Suitable for: All our designs are free to download and use —we believe sharing drives innovation. Your support fuels our creativity. If you downloaded and enjoyed this file, please leave…
4040 T-slot Clip-in Anchor Wire Cable ZipTie Mount Suitable for: https://www.printables.com/model/1337775-4040-rv2-series-extruded-aluminum-profiles-collect…
Digital Prototype: Modular Bed Frame from 4040 Aluminum Extrusions Important Notice: This project is a purely digital prototype designed in CAD software. The design has not been physically built or tested for its structural integrity and…
These are 4040 Extrusion Mounts that are compatible with the changes I made for the Wheeled Hybrid Model below.
Been using this for a while now. Printed them out of ABS. Sure there are other ways to mount this but this worked fine for me. I've made them this tall so a power strip can still be mounted underneath the rig. Hardware needed per mount:…
Update 14.04.2026 Added HULA adaptor BOM is a bit different for this drive. You gonna need 4 M3*60 SHCS and 2 M3*45 SHCS. 1 more 625 bearing for the motor shaft 2 more heat inserts 2 more M3*9 BHCS 2 more M3 WASHER 1 more M3x8 SHCS 5 more…
Uploading this as basically just ideas for another way of doing things. This came to me when I was disassembling the Ender 3 V2 and noticed there was a lot of decent flat sheet metal stock. I happened to have a pair of aviation snips/tin…
Cable management solution for 40x40 or 30x30 Aluminium (aluminum) extrusion profiles.
This model was technically never destined for uploading since i thought it was too meh, but thanks to Tobi 82 for spotting it in my Ender 3 Anti Vibration feet model, I uploaded it anyway just in case anyone else would be in need of one!…
Just take a look at the original model as I just modified it a bit. Thumbs up to the original author! Thanks!
This replacement fan blade fits a Ryobi blower model RY404010VNM and works great using PLA material and nozzle 0.4.
Sabrent usb hub holder for 4040 no screw Works for HB-BUP7 and HB-BUP10 4 walls/0.2mm standard pla/petg ok
This takes Onejensen's original file, and slices across the axis specified at the point specified, then extrudes the slice to the length specified. This came about because there were indications that Onejensen's file had differences in…
PXN CB1 Control Button Box mount for 4040 aluminum extrusion. Features an adjustable angle for improved ergonomics. Includes a center hole for M8 rig mounting. The design allows the CB1 to rotate: install the central screw first, then set…
I took the 4040‑extrusion screw‑mount section from the Ender 3 Pro Y/Z tensioner and merged it with the anti‑crossthreading horizontal‑printing screw mechanism from Thompson Studios’ remix. The 4040 screw hole and mounting geometry were…
⚠ This rollator is intended for indoor use on flat floors due to its weight and lack of hand brakes. Its weight makes it hard to carry around. Bill of materials Alumin(i)um extrusion I used 4040 extrusion with an 8.2 mm slot width, 40 mm…
Some time ago I've build a simple cigarbox synth out of a famous german MAKER magazine ... . But I don't want to use a simple cigarbox as enclosure. So I've created this. The printing was done with "glow in the dark" red PLA and mint…
I needed an extended 4040 top mount for the z axis. Uses 4 M5's and t nuts to mount and 1 to screw into the extrusion. If you're feeling generous: https://buymeacoffee.com/lascius3d
This mod allows one to reuse the included 350mm 4040 extrusion as is, without having to cut it to 300mm! Profile mounting face was moved back 25mm and up 10mm. Supports where extrusion is fitted are needed. Recommended to print flat it…
Replacement fan for Ryobi RY40408VNM 40v Blower. Part # HM-537642001, Print with PETG-CF.
4040 RV2 Series Foot Cap - Low Type - with predisposition for fixing with screws Suitable for: Resize to adjust dimension All our designs are free to download and use—we believe sharing drives innovation. Your support fuels our…
With these hangers you can sort and arrange your cables and/or Multimeter leads. Printed with my MK4 in PETG. I printed standing, with supports, which give the part more stability. Explore my other Printables:…
My project was an Ender3, and an Ender3 v2. One of them came with larger rubber feet with dimensions approximately of 39x19.6x12mm. Additionally, I didn't want to cut the threaded rods. I used the Duender Z Motor Spacer found here:…
Just easy keyboard stand with prepared holes to mount sim rig or elsewhere. I printed it with PETG and 4 perimeters. In slicer mirror model for right side. Please share your 3D Prints. Thank you 🙏
Simple Holder for a Raspberry pi 3/4/5 with a passive / active Aluminium Case to mount the pi with some backspacing to a Wall for better airflow / cooling. You can use it to mount you Pi on Aluminium Extrusions (2020,2040,4040,….)of your…
These TPU feet are designed to decouple the BedSlinger from other 3D printers on the same surface by absorbing vibrational energy, helping to minimize machine wear caused by vibrations. Benefits When you place a single printer on the…
You may need to push hard or flex the cap to get it on the end. I did this to prevent it from falling out when rotating the printer on its side. Tinkercad: https://www.tinkercad.com/things/jQGb4M4sfl3-4040-ender-3-cap
Mounting solution for USB Hub as for this model. https://nl.aliexpress.com/item/1005005071915803.html?spm=a2g0o.order_l
Support pour BTT TFT35-SPI V2.1 pour profil 4040 comme la ENDER 3 Version 2.0 support plus épais.
The release nubbin on our washing liquid tray wore down and no longer latched. This glue-able collar raises the clasp and adds some structure to the bottom side of the original part. You could also repair this with building up a profile…
Remix of a Raspberry Pi 2 Zero bottom by loidolt 4040 Slot Extusion
rigid camera mount originally designed for anycubic kobra 2 series printers but will fit any printers with 4040 rails
4040 Tslot Aluminium Profile plus Accessories for profile system Adjust the Z scale to obtain longer profiles ( 4040_Tslot_Aluminium_Profile.stl) Accessories for 4040 profile system 4040_T-slot_Nut__Aluminium_Profile_M4…
Supported Corner Bracket HEAVY-DUTY - 2020 / 3030 / 4040 / 5050 V/T-Slot Profile REV.1 Engineered for easy printing and minimal material waste, this 90° bracket offers sturdy, rigid performance Suitable for: 2020 -3030 -4040 -5050 V-Slot…
I wanted to install retractable casters on my RatRig Workbench 2.0. I choose https://www.amazon.fr/dp/B0C5DDYLX8/ref=twister_B0C5J2D7JJ?_encoding=UTF8&th=1 Holkie 1000 kg, which seem to be fine for my needs. This a model to connect the…
My desk is made of alu. extrusion profiles and a wooden top. This gives me the chance to utilize the alu. extrusion for many purposes, e.g. here to fix the headphone stand. I didn't find any headphone stands for alu. extrusions therefore…
Profile Connector 90° for 2020 / 3030 / 4040 V/T-Slot Profile Resize to adjust dimension s 30/09/2024 added Conn40x85x40mm M8.stl All our designs are free to download and use—we believe sharing drives innovation. Your support fuels our…
Round switch mount for the end of a piece of 4040 extrusion commonly found on ender 3 printers
This tool will help you align M6 self-tapping sleeves for 4040 I-type profiles ( example ). It makes it easier to get the sleeves working right the fist time you make a cut. Some remarks: Make sure that the 4040 profile has a straight cut…
Tensioners for Ender 3 Pro – Precision Made Simple Introducing the GIL tensioner, designed specifically for the Ender 3 Pro with 2020 X rail and 4040 Y rail. Precision is at the heart of this design, with tolerances dialed in to a tight…
Mounts are currently setup for a passenger seat, Driver side would require mirroring the rear outboard part. Will need to mirror the front mount as well, or don't. Mounts are pretty basic, 8mm bolts thread directly into the plastic, was…
wanted to dress up at the end of my 4040 extrusions. so I made these simple caps.
Z Height Probe holder for Genmitsu 4040-PRO MAX Can be mounted with double sided carpet tape
Completely redesigned case. Now utilizing M2.5 threaded inserts with a front mounted 4010/4020 Fan and dual LM2596 voltage regulators for the Raspberry Pi and optionally a Noctua 12V fan. Parts for this build: Part Quantity M2.5 X D3.5 X…
A jig to drilling holes for blind joints in v-slot extrusions as well as for tapping the ends of the extrusions. I use it when drilling and tapping the holes for 3D printer builds. There are 2 jigs. drill_tap_jig - This is used to tap the…
Hi everyone! 😊 Due to popular demand, I decided to design my own enclosure for the Bigtreetech TFT 35 V3.0 display. This box supports the standard display emulation included with the printer and can switch to touch screen mode. I’ll be…
This is the 40x10 mm version of the Cable Duct for 4040 profiles. It comes in three lenghts, 50 mm, 100 mm and 150 mm. Due to the minimal height it might be a bit hard to remove once it's clicked into place. Also see my other models for…
This is the 40x20 mm version of the Cable Duct for 4040 profiles. It comes in three lenghts, 50 mm, 100 mm and 150 mm. Also see my other models for 40x10 mm and 40x40 mm versions.
This is the 40x40 mm version of the Cable Duct for 4040 profiles. It comes in three lenghts, 50 mm, 100 mm and 150 mm. Also see my other models for 40x10 mm and 40x20 mm versions.
ProStand 4040 - MagSafe & Apple Watch Heatsink Dock The ProStand 4040 combines sleek design with practicality, using 4040 aluminum extrusion to securely dock your iPhone and Apple Watch while providing passive cooling. The setup is…
This is designed to be used with heated inserts, the size I used is 1/4“-20x12.7. But any ¼ inch insert should work, as long as it's not longer. The ones I used: https://www.amazon.de/dp/B09MTS6ZZQ It's a very simple and convenient way to…
I needed to mount 4 spools on a 4040 extrusion and did not find anthing to my liking, so i shamelessly remixed this spoolholder as it was fitting for my 1kg spools (70mm) - other bearing spoolholder are too broad - and could be easily…
Quick print for a nice inside corner brace for 4040 extrusions. Remixed from Piotr's remix https://www.printables.com/model/1012482-voron-corner-brace-2020-m5 which was a remix of JSB's original file…
The mount I designed as seen in this video: https://youtu.be/8yjHQ3v1obE Category: 3D Printer Accessories
Hide your wires! I have an ever-growing bundle of wiring next my printer and I want it gone. You can hide your wires in this box and you can rotate it with the vented side out or in depending on which style you like better. Or if you…
I noticed my Ender 3 had a slight wobble when sitting on an even tabletop and I couldn't seem to adjust it. Printing these legs fixed my issues. Plus, elevating the printer 2" made it much easier to move around when needed. I also added…
Set of 3D print to replace the clamp for CNC 4040 from Genmitsu using their screw and nuts. The design is inspired by the clamps used if milling machine : a stair case and a finger are attached to the bed in a way that the pressure on the…
I upgraded my Trident corner extrusions from 2020 to 4040s and that rendered the original printed pieces unusable. New parts needed are the hinges and latch hinges, however to make the mounting more accurate and a bit smoother based on my…
Add-on for the CNC 4040-PRO to hold the Probe, the tools for the collet and the 2 allen keys. The model needs a magnet (10mm or less): The magnet will hold the holder on the junction box on the Z axis and at the same time will secure the…
Since I upgraded my Ender 3 v2 to use Klipper I could not use the old screen any more. This enables you to mount the cheap 3.5" touchscreen for Raspberry Pi to the side of your Ender (or any other printer that has a frame of aluminium…
Just a basic 4040 extrusion end cap compatible with the ender 3 or any 4040 extrusion. For the print setting you can use any settings you want. it’s not hard to print. As always if you have any questions just comment below or message me.…
Low cost (0.10 $US) Enclosure for Adafruit VCNL4040 Proximity and Lux Sensor to allow for handling, use and mounting of the sensor.
The rocker is deisgned to help rotate a printer onto its back to allow for easy access to electronics. It is inspired by similar Rock n Roll mods for Voron printers. Printing with 0 bottom and 0 top layers can give for a nice effect,…
A mount that uses threaded nuts and bolt to adjust and lock the camera in place. The bolt also guides the camera cable.
A gantry plate for 3 roller wheels that fits on a 40mm wide v-slot aluminum extrusion. For a full assembly you need: 3 roller wheels with 24mm diameter 1 eccentric nut ID 5mm that fits in a 7mm hole 2 spacers ID 5mm 3 fasteners M5x28 or…
Update evening 12/15/24: I've added the case to support the LCD screen. Simply added a 2mm notch where the screen would mount so the metal bracket and the case can sit flush. Additionally, I've added the lid to this as well in the same…
This is the carrier / holder for a Prusa spoolholder arm included in latest printers (I used MK4 leftover arm). Carrier is built to fit Rexroth 4040 profile slot - with a slot nut and M8 screw DIN7991
Wanted a hinge to put on my sim rig, to allow my keyboard tray to move away while playing. This won't hold much load, for obvious reason, but it serves me greatly. No supports needed for printing. You'll only need a partially threaded…
Simple and light K400 holder for my sim rig. It could fit other keyboards, i have no idea - feel free to try and let me know. It's not designed to use the keyboard on it, only to rest it while not in use. It appears to hold fine if doing…
Just pieces to join 4040 aluminum extrusions. To hold them temporary or to join pieces that don't hold much weight
M3x10 bolts and T-nuts for mounting. meant for 22mm OD/18mm ID CPAP hose. Print as oriented, use supports. 4 walls, 20% infill and well-tuned part cooling needed.
Designed for the pro series of button boxes with the 90*80 drill pattern. I'm very new to 3d printing (and even newer to modelling) so I've kept the plate very simple. Printed on an A1 mini using 25% infill to try and minimize any flex.…
Need the right profile fast? Just put it in a slicer, scale it as needed, and print! Included Profiles: 20x20 20x40 4H 20x40 30x30 40x40 40x80 80x80 These models are based on the MayTec® profile system. Update: I have designed some T-nut…
I was looking for a PTC Heater mount for my Ender NG and couldn't find anything that I thought would work well and be sturdy, so I made this one. It's a simple design and very easy print. Best to print in PETG or something with higher…
A simple bracket to mount a Stream Deck Neo to my Sim Lab GT1 Pro cockpit. I attached the Stream Deck with a thin cable tie to keep it in place (pictured). I then attached the whole thing to my rig with M8 T-slot nuts and M8x12 bolts.…
Small Container Box for 2020 / 3030 / 4040 Vslot Profile Prusa XL Voron Sovol Suitable for: 2020 -3030 -4040 V-Slot T-Slot Alu profile 3d Printer Suitable for: Prusa XL - Ratrig - Voron - Sovol Update: 11/02/2025: added Prusa Logo version…
BOM 2 * M3 30mm screws at minimum 8 * F695 flanged bearing 1 * 5mm drill bit that can clear 65mm (40mm extrusion +25mm Jig) Link to onshape document .
The original display of my Ender 3 was getting in the way of my IDEX conversion. I rarely use the controls on the printer itself because it runs Klipper, but didn't want to give them up altogether. I designed this small holder for a 1.3in…
Fake Aluminum Profiles 40x40 (print and try before buy). For prototyping or as a toy. Disclaimer: This model is for testing purposes only and must not be subjected to static or mechanical stress!
Corner endcap with mouting points for 4040 alu-profiles i used as table-legs. They are designed for a tight fit to hammer them on. I used them as bottom and top-part for 4040 profiles to build a little multiboard/skadis organizer. Can be…
A simple cable clip for use with 4040 extrusion.
Two piece handle for Series 40/15 (40mm / 1.5in) Aluminum Extrusion Included step file incase you need to make changes. I printed it upright, and on the side. And I think the side comes out better. I used tree supports and a brim when…
This remix makes the feet a little stiffer, and about 50% wider. Finally I made the horizontal sections solid for added strength. I absolutely do like the original, but when 8 of them break, snap, collapse in 2 weeks time, I need to get…
End Cap for 4040 aluminum extrusion - 4 variations to choose from: 4mm stick-out with M5 screw holes 4mm stick-out without screw holes 8mm stick-out with M5 screw holes 8mm stick-out without screw holes Print as oriented. Designed for a…
Base para Snap Micro Switch D3V-16G-1C25 D3V-16G-3C25 Horno de microondas o similares, para montar se requiere de 2 tornillos M4*10 2 tuercas M4 El Micro Switch entra a presión y de ser necesario se añade un poco de silicón caliente. las…
