3.5" Raspberry Pi Screen mount for 4040 extrusion
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount and bezel for the 3.5" Raspberry Pi GPIO Touch Screen to mount to the side of your printer.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 304
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
Since I upgraded my Ender 3 v2 to use Klipper I could not use the old screen any more.
This enables you to mount the cheap 3.5" touchscreen for Raspberry Pi to the side of your Ender (or any other printer that has a frame of aluminium extrusions).
You will only need two M4 screws and matching t-nuts for the extrusion and 16 5x3mm magnets that get glued into the printed parts to hold the bezel in place. To conserve space, the magnets on the left side get glued in standing up.
I have also included a version of the bottom part to mount to the left side of your printer, however as I do not use this myself I cannot guarantee it fits (in theory it should, though).
Onshape Link: https://cad.onshape.com/documents/09ad36777d21ae7b49ac5253/w/71acc0ced91407d837b3a303/e/d7e692fd9a6e7f28480885d6