1 / 6
FYSETC USB ADXL345 Mount (Ender 3 and Similar Printers) — zdjęcie 1
1 / 6

FYSETC USB ADXL345 Mount (Ender 3 and Similar Printers)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Convenient X and Y Gantry Mount for FYSETC USB ADXL345

Ocena
4,5 / 5
Polubienia
34
Pobrania
262
Wydruki
2
Wyświetlenia
1257
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a mount for the FYSETC USB ADXL345. It mounts easily to most Ender 3's and its clones (I am personally using this on a Voxelab Aquila).

It mounts easily and securely to the printer by sliding it firmly onto the X and Y Gantry.

There is also a handy mount for a V-Slot extrusion so you can easily store it on your printer.

Required Hardware:

  • 2x - 8mm M3 Socket Head Cap Screws
  • 1x - 8mm M4 Flat-Head Screw (Optional - For storage mount)
  • 1x - M4 T-Nut (Optional- For storage mount)

Print settings:

  • Layer Height: 0.2mm
  • Infill: 100% (recommended)
  • Supports: Recommended but not required

Modifications considered upon request.

Please post your makes and let me know how it works out for you! 

~~~~~~~~~~  Update Log  ~~~~~~~~~~

8/10/2023 - Initial Release

Tagi