1 / 1
Fysetc Spider Motherboard holder+fan shroud
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fysetc Spider Motherboard holder+fan shroud (2x60mm fans)
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 71
- Wydruki
- 0
- Wyświetlenia
- 450
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I decided to design my own holder and fan shroud for the Fysetc Spider motherboard
For the holder i used m3x5.7 od4.6 heat set inserts
For the fan shroud i used 4xm3 35mm screws and another 4 m3 20mm screws for the fans (in my case 60x60x15), they should screw directly in the shroud.
The shroud should sit high enough to clear heatsinks that may be on the tmc drivers
I also added the step file for it